• Notice regarding image hosts and attachments. See here.

Changing Car Bulbs

Soldato
Joined
27 Aug 2005
Posts
3,843
Just a mini rant here:mad::mad:

Just spent a good 30 mins replacing my girlfriends front light bulbs and my god are they a pain to replace. They leave you with the smallest amount of spaces to operate and not i have cuts all over my hand:mad::mad:

Last month i had to replace her rear lights and it was exactly the same situation. There is barely enough room to fit an adult hand in there whilsts trying to undo the clips and plugs:mad:

The car is a 2006 Toyota Yaris and rant over
 
Pay £6 at Halfords then? I hate doing anything on my car other than the necessary (i.e. fluids, etc.) as it's a pain to get to. You have to decide whether 30 minutes of your time is worth the £6 or so quid you pay for someone else to do it.



M.
 
In my car you have to remove the whole light cluster to change the front lights..... Not looking forward to that job when they pop.

EDIT: It's not an F40.
 
What car do you drive? I have to remove my whole bumper and light cluster to remove the bulb from my DC5 :(

Fiesta mk7. What's worse is some of the early ones had a habit of going through bulbs until it was fixed by Ford. Fortunately mine's fine, though the bulbs are pretty yellow and not totally blinding to other drivers on the road, unlike most cars nowadays.
 
In my car you have to remove the whole light cluster to change the front lights.

Mine is the same, but thankfully all you have to do is pull up a retaining pin and the whole cluster slides out. The whole process takes all of 60 seconds!
 
Fiesta mk7. What's worse is some of the early ones had a habit of going through bulbs until it was fixed by Ford. Fortunately mine's fine, though the bulbs are pretty yellow and not totally blinding to other drivers on the road, unlike most cars nowadays.

I've got an MK7 myself and had to replace my bulbs once. It sounds like a nightmare to do but it's actually straightforward - two screws and unclip a cable and it just lifts right out pretty easily. It's literally less than a 5 minute job to take the light out, change bulb and refit it :) The rears however, I haven't had to do and so haven't looked into but I bet they're not as straightforward.
 
My wife has a 59 plate Focus and decided to upgrade the headlamp bulbs - first step in the instruction manual*:

  1. Remove headlamp cluster. :rolleyes:

Queue me advising her to nip up to Halfrauds and play the *dumb female* with "can you fit my bulbs please" To be honest the £3.99 she paid for fitting was worth every single penny to see their grease monkey skinning his knuckles trying to get the cluster out then re-fitting ensuring the headlamp aim was correct! Also, I've noticed changing the bulbs in my MK6 Fiesta is bad enough as there's hardly any room at all to work with there either!

*Yes I'm a bloke and I read the manual - well, skimmed it anway. ;)
 
The focus is easy to replace the headlamp bulb. Yeah you have to remove the headlamp, but it's easy to do, a clip and some screws and unplug the connector?

My dad's Toyota Avensis, that's another story. The whole front bumper had to be dropped to get the headlamps out to change the bulbs (No i'm not joking) and Toyota charge an hours labour plus parts (They wouldn't fit bulbs you'd bought).

Never the less, not long after he got rid. He didn't like it anyway and got a trusty MK3 Mondeo.
 
:eek: got any tips for the fronts? back lights are easy though

Front's, I know the side lights can be a bit difficult but nothing too major. On the driver side, you need to remove the washer bottle neck but bar that, I find it easy enough.

We may be talking about two different headlight designs. If you're talking standard, you have either Phase 1 Frosted or Phase 2 Crystals. I'm referring to Phase 2.
 
Does it seem to be a "Modern" thing in car design to leave absolutely no room inside an engine bay for access? All my previous cars upto about T-Reg had adequate space for the simple things like bulb replacement for example but most newer cars seem to have the same issue where the only way to change them is to pop the headlight out. As a blown headlight is a safety issue at night shouldn't they be very easy to change without using tools, just in case?
 
My wife has a 59 plate Focus and decided to upgrade the headlamp bulbs - first step in the instruction manual*:

  1. Remove headlamp cluster. :rolleyes:

Queue me advising her to nip up to Halfrauds and play the *dumb female* with "can you fit my bulbs please" To be honest the £3.99 she paid for fitting was worth every single penny to see their grease monkey skinning his knuckles trying to get the cluster out then re-fitting ensuring the headlamp aim was correct! Also, I've noticed changing the bulbs in my MK6 Fiesta is bad enough as there's hardly any room at all to work with there either!

*Yes I'm a bloke and I read the manual - well, skimmed it anway. ;)

It's so simple on a Focus it's unbelieveable.

Undo screw on top
Jab long screwdriver down each side until you hear a click
Pull out headlight
Take off back
Replace bulb
Reverse.

I've had to do it a few times now to change sidelights twice and also had to take them out to get to the front foglights. Takes less than 5 minutes per side :)
 
Back
Top Bottom