Cisco 851 Help

mmj_uk · 29 Jul 2006 at 15:15

I've made a bit of progress, i didn't realise the commands were case sensitive.

i dont think tftpd is setup correctly though.

http://www.mmj.myby.co.uk/router3.jpg

mmj_uk · 29 Jul 2006 at 15:41

windows firewall is disabled yes but like i said when i run sygate security scan quite a few ports are still being blocked so im presuming the hardware firewall is still operational in some way. :confused:

i still keep getting getting timeouts gona keep trying different things....

mmj_uk · 29 Jul 2006 at 15:56

i'm sending via Xmodem now, going very slowly.

it didn't seem to like me increasing baud rate so stuck at 9000ish still, 3 and half hours to go wish me luck- at least i can play wow whilst it sends.

thanks for all your help.

mmj_uk · 29 Jul 2006 at 15:56

how do i format the flash?

mmj_uk · 29 Jul 2006 at 16:01

how do i format the flash? i fancy a fresh start...

im pretty sure that once the IOS is installed the manuals have sufficient instructions for setting up the router with SDM so i should be ok then (touch wood).

mmj_uk · 29 Jul 2006 at 16:07

ok ill report back later... thanks again guys.

mmj_uk · 29 Jul 2006 at 20:03

ok it's done and copied over ok, it is still registering as old version 'bootstrap' (is that a problem?) but the newer IOS image runs fine although once again i am totally stuck.

mmj_uk · 29 Jul 2006 at 21:04

do any of you live in the Sheffield area?

i'm now getting Router> prompt but i'll be damned if i know what i'm doing, it isn't even connecting anymore now i'm having to run straight from my modem.

I can't install SDM because there's no IP to connect to it. :rolleyes:

mmj_uk · 29 Jul 2006 at 21:28

it complains on the int fa0/1 part, i don't think it likes the slash.

mmj_uk · 29 Jul 2006 at 22:24

is it possible to RMA it to Cisco to be restored do you know? even if for a fee I've had enough and admit defeat been up since 7 ffs.

thanks for all your help though.

mmj_uk · 29 Jul 2006 at 22:35

ok thanks, yeah i just meant get them to repair it for me for a fee or whatever not return it as faulty.

Information here:
http://www.cisco.com/en/US/products/hw/routers/ps380/products_data_sheet0900aecd8028a9a9.html

WAN INTERFACE - 10/100 Mbps Fast Ethernet
LAN INTERFACE - 4-port 10/100 Mbps switch

mmj_uk · 29 Jul 2006 at 22:42

my modem goes into the wan socket pc/xbox etc into any of the 4 lan sockets.

mmj_uk · 29 Jul 2006 at 22:51

sh run: www.mmj.myby.co.uk/New%20Text%20Document.txt

mmj_uk · 29 Jul 2006 at 22:58

LAN = FE0-FE3
WAN = FE4

hope this helps, i'm logging off for the night shortly but thanks again.

mmj_uk · 29 Jul 2006 at 23:02

do i have to type all that in? or is there a way i can just run it?

if typed in i'll have to leave it while tomorrow im afraid, thanks a lot though mate.

edit: ah ok, 2mins.

mmj_uk · 29 Jul 2006 at 23:05

for the ip address and gateway do i use what's currently showing in ipconfi with just my modem plugged in?

mmj_uk · 29 Jul 2006 at 23:12

is DNS servers all three addresses from ipconfig? ip/subnet mask/default gateway?

mmj_uk · 29 Jul 2006 at 23:27

well the activity lights flash which is something that hasnt happened since i screwed it all up, but the internet doesnt work i just get page cannot be displayed messages, i even tried renewing ip manually release/renew.

strangely if i reboot it then it works during boot but once everything has loaded it stops. :confused:

i'm logging off for night now anyhow, thanks again mate i must be hard work i suppose this is good experience for me though in an area i suck at lol. :rolleyes:

mmj_uk · 30 Jul 2006 at 13:26

Well i've given up, tried running setup also but it is by no means simple.

I'm just gonna retire it until I can find someone to come and sort it for me or maybe find a decent book on Cisco IOS.

Is this any good do you reckon?
http://www.amazon.co.uk/gp/product/076451668X/202-9164037-6720665?v=glance&n=266239