• Notice regarding image hosts and attachments. See here.

Coke Spillage :(

Associate
Joined
14 Nov 2008
Posts
66
Last night a random gust of wind, knocked a glass of coke over my pc while it was running, screen went strange with lines and stuff, and monitor light went orange.. pc was still running so to speak, i powered it down straight away, and started to look for the damaged, couldn't obviously see anything at the time, and started to dry inside.

Tried to power on the pc, but nothings happening, the psu seems to be powering on my mobo as the mobo light is blue, but not much else is happening.

Ive took out and checked GFX, changed GFX e.t.c
Took battery out and re-inserted.
Left my pc off at the mains for this afternoon, to try and dry it abit more e.t.c, but all the no avail...

Not sure on what else to try, any help will be highly appreciated.

Many Thanks

Ryan
 
Gust of wind, sure ;)

All I can suggest is to do what I did when I dropped my phone in a puddle: keep it powered off for a few days, put it in an airing cupboard or point a big room fan at the mobo and try it again.

Chances are, though, as it was powered up when the coke (diet or regular) hit it, you've - sorry, the WIND - has shorted something.

Finding out what component is now broke and getting it replaced will prove very tricky. Do you have another rig you can switch out parts one at a time on to to try and isolate the failing one?
 
Lmao, i was the proper stuff, regular coke :P, ive got a little white fan that i could give it a blow with haha..
Nope haven't got another rig to change components e.t.c :(
 
As it was turned on at the time, that's probably done some serious damage. I'd suspect the mobo is goosed. I'd disconnect everything from the motherboard apart from the CPU (no GFX, no RAM). Power on and see if there's any life/any beeps.
 
problem with pcs is theres always a little bit of electricity in the mobo somewhere, even if it had been of a glass of coke is likely to do damage but good luck!!
 
You could clean any area where the coke has been with WD40.

WD40 is 100% safe to use on circuit boards, I used to work in a TV shop and witnessed my boss at the time spray it onto TV boards and power them on, including area's carrying high voltage.

The WD40 will help to remove any of the residue and is your only hope, if it doesn't work after a good clean with this then you will have blown something and its new parts time :(
 
Coke is a real computer killer

Insurance?

If not:

If it is still wet (probably not ) switch all power off and take it apart as much as you can and rinse it all with warm water

I know this sounds insane but some damage has been done, coke left in / on circuitry will eat away at it so if you can clean it off

Dry all the part thoroughly at least 3 days, put it back together and power it up with your figures crossed

Belive me there is not much you can do. I have learnt the hard way :eek:
 
Back
Top Bottom