Connect two routers wirelessly

Associate
Joined
8 Jan 2009
Posts
743
Location
Gidea Park, Essex
Hi guys

I'm running out of pci slots and want to add another gpu soon. I'm just wondering if I can connect a wireless router to my Ethernet port on my pc and use that router to connect to my other router in the house?

I basically want it to connect to my other router so I can use the Internet. Is this possible?
 
My god will people stop using routers when there is no need to.

You either want a wireless bridge, or (even simpler) a USB wifi card.
 
I don't like the use of USBs for my network. Plus it will be useful to increase the network coverage upstairs.
 
You need a router or bridge that supports WDS. I use this method to extend the wireless network into the garden in the summer.

I think it might half the bandwidth of the wireless network though. Maybe some can confirm this for you.
 
You need a router or bridge that supports WDS. I use this method to extend the wireless network into the garden in the summer.

I think it might half the bandwidth of the wireless network though. Maybe some can confirm this for you.

Can you explain what you did to achieve this and if possible list your networking hardware.

Thanks
 
I don't like the use of USBs for my network. Plus it will be useful to increase the network coverage upstairs.

You don't like the idea of USB, however for a a single subnet and one LAN>WAN interface you are happy with multiple routers?

Seriously, get a clue. Go do some reading up on network topologies.
 
Is there really any need to be so condescending? I don't think so.

Can you explain what you did to achieve this and if possible list your networking hardware.

Thanks

Like I said, both routers/wireless bridge need to support WDS and it can extend the range of your wireless network beyond the second router/wireless bridge, which is in repeater mode.

Maybe you can get a wifi card that supports WDS, I'm not sure. Don't be afraid of using USB for it though, I don't see an issue with that.
 
Is there really any need to be so condescending? I don't think so.

Perhaps not condescending, but there is a real need to make home users aware of the correct use of networking hardware.

People using mutliple routers in a single subnet home environment are people who really shouldn't be giving advice as to network topologies.
 
sandeep theres not enough info to plan a topology

assuming you want to remove a wifi card from the pc but still connect to a router then homeplug ethernet would seem a simple way

pc ethernet>homeplug adapter >ethernet via mains>homeplug adapter>router ethernet port = internet on pc

depending on where and how much wifi coverage you need for other pc's wifi could be retained or binned,

multiple routers are a hard way to do what i suspect the OP wants
 
sandeep theres not enough info to plan a topology

assuming you want to remove a wifi card from the pc but still connect to a router then homeplug ethernet would seem a simple way

pc ethernet>homeplug adapter >ethernet via mains>homeplug adapter>router ethernet port = internet on pc

depending on where and how much wifi coverage you need for other pc's wifi could be retained or binned,

multiple routers are a hard way to do what i suspect the OP wants

Home plugs cost twice as much as using a bridge.
and for using a USB adapter, I'm using Mac OS X on my pc as well and I don't want the internet to stop working if there aren't any drivers for the usb.

So I figured an ethernet to wireless bridge will be better.
 
People using mutliple routers in a single subnet home environment are people who really shouldn't be giving advice as to network topologies.

There you go doing it again! You really can't help yourself can you. It's not difficult giving people advice without being an arrogant ****. Give it a try sometime.

And if you must know, I only use a second router as a repeater because I already had it and it has this function. I certainly wouldn't go out and buy new hardware just to please you.
 
There you go doing it again! You really can't help yourself can you. It's not difficult giving people advice without being an arrogant ****. Give it a try sometime.

And if you must know, I only use a second router as a repeater because I already had it and it has this function. I certainly wouldn't go out and buy new hardware just to please you.

:D
 
There you go doing it again! You really can't help yourself can you. It's not difficult giving people advice without being an arrogant ****. Give it a try sometime.

And if you must know, I only use a second router as a repeater because I already had it and it has this function. I certainly wouldn't go out and buy new hardware just to please you.

I don't care "why" you are doing it, it's wrong. So it isn't good advice regardless of how much of a **** you think I'm being.
 
I did, way up there at the start of the thread.

A wireless bridge, or a USB wireless card.

If you are gaming however I'd urge you to run ethernet cabling from the PC to the (one) router.
 
I did, way up there at the start of the thread.

A wireless bridge, or a USB wireless card.

If you are gaming however I'd urge you to run ethernet cabling from the PC to the (one) router.

I'm up in the loft and the router's downstairs so I don't really want to run cables right downstairs.

I found a Linksys Wireless N Bridge, it's got some good reviews so I thought I could get this one.

What your opinion?

http://www.linksysbycisco.com/US/en/products/WET610N
 
It'll work, but it won't be the best situation if you are gaming.

If you really can't run cables then user powerline.
 
It'll work, but it won't be the best situation if you are gaming.

If you really can't run cables then user powerline.

I don't really game that much online anyway, not a heavy gamer, just need internet access which will give me what I need.
 
Back
Top Bottom