Coolermaster Eisberg

nick.lidgett · 17 Sep 2013 at 22:23

If i was to buy just the Eisburg itself and added my own tubing and radiator, is it easy to fill?
I know there is a fill port on the top of the unit itself, do you just plug it in, power it up and fill as its pumping?
Any extra information would be helpful.

Freddie1980 · 17 Sep 2013 at 22:31

I believe ocuk do their own custom aio coolers based around the Eisburg, you might want to ask in the customer services forum for tips on how to build your own.

rjk · 18 Sep 2013 at 09:33

yep, its easy to fill. just takes time and patience.

Mayhems · 18 Sep 2013 at 09:42

rjkoneill said:
yep, its easy to fill. just takes time and patience.

dead easy but slow to fill. If i can offer up a small bit of advise, Fit it in the case and set up your tubing them remove it all from the case and fill it out side of the case. By filling it out of the loop you can easily remove all air and have a problem free system. If you really getting stuck just ad a small cheap res into the system and this will solve a lot of smaller annoying issues

.

Removing the air out the system you "will" see ad 2 to 4c improvement in temps.

nick.lidgett · 18 Sep 2013 at 18:45

Thanks guys, sort of sounds like a pain in the rear, probably better to buy a ready built one from the OcUK store.

Mayhems · 18 Sep 2013 at 22:35

No its not a pain in the rear and far from it. That little all in one is a delight to work with to my very own surprise.