• Notice regarding image hosts and attachments. See here.

Correct voltages?

Caporegime
Joined
3 Jan 2006
Posts
25,389
Location
Chadderton, Oldham
Hi, well I've got the CPU set to 1.55V in the bios, but in Windows Speedfan and CPU-Z is reporting the voltage on Vcore1 as 1.50V, is this accurate? As if so I've got some more voltage headroom to possible push my CPU further.

CPU-ZSPEED.jpg


Thanks.
Willz.
 
Yeah 1.5v in Windows is correct due to vdroop. It'll drop a little more under load.

How much more you have to play with depends on your load temps. And the latest CoreTemp would be a better indicator than Speedfan tbh.

So setting it to 1.6V in bios should be 1.55V?
 
So its ok if I put the voltage to 1.6V in bios as it should be 1.55V which is ok for my CPU? I just dont want to fry it.
 
What kind of load temps are you currently getting?

About 57-59, I'm fine with it going up to 65-67.

I dont know if I'll keep it at the higher voltage with higher clock but I am hoping I can get a higher clock and possible higher 3dmark.
 
I can't help feeling that the temps in your first post are very low. 25-27c at 1.5v and 3.4ghz seems way off, even if your ambient temp is low.

Is that 57-59c under Orthos/Prime95 or 3D Mark?

57-59 was Orthos.

speedfan is fine, as big wayne told me:

"Coretemp is correct as is speedfan, the 15°C offset is only for newer chips (Allandale, G0 cores etc)."

1 other questions though, is the cpu tempterture the one at the top? Or what core 0 and core 1 say?

Core 0, Core 1.

I'm idling at 30-31 degrees atm.
 
Back
Top Bottom