Corsair 2GB DDR XMS3200PT TwinX Overclocking help

Vegeta · 15 Nov 2006 at 18:37

Hi I just recently got this ram

Corsair 2GB DDR XMS3200PT TwinX

It runs 3-3-3-8 @ default, what kind of overclock should I be looking to get on the timings, does the FSB overclock well at all on these modules either?
I know best way to find out is to test myself but if someone could give me details to start with that would be great, my motherboard does 2.85V max.

squiffy · 15 Nov 2006 at 18:41

I'm running at 192mhz, CAS 2-3-3-5, command rate 1T, 1.75v.

Vegeta · 16 Nov 2006 at 22:13

Hmm this ram seems to be a really good clocker (in terms of lowering latencies, havent tryed upping the FSB).
Does 2/3/3/6 fine @ 200fsb on 2.7V (using 2.7v because I don't know what the default it).
To get cas 2 for a ram advertised as cas3 is rather good i'd say, ran memtest for a hour testing #5 (only ever seems to get errors on this test), gamed for a bit no errors so far.

squiffy · 16 Nov 2006 at 22:40

erm I think 1.75v is the default voltage...2.7v is a bit much I would think!

Vegeta · 16 Nov 2006 at 22:57

I think you got your numbers mixed up mate.

squiffy · 16 Nov 2006 at 22:58

hang on I'll reboot and check BIOS voltage. ah it's set at 2.75v.