Corsair Dominator Platinum c9 2133

Silent_Scone

Silent_Scone

Silent_Scone

Soldato
Joined
5 Sep 2011
Posts
12,876
Location
Surrey
Hi,

Just a quick post to say this kit is awesome. Although pricey you definitely get Corsairs rampant binning.

Will do 2400 c9 @ 1.65v all day long, but what is more impressive is it will do 2133@ CL 8-10-10-27 T1 @ 1.58. Still playing to see if I can get the volts lower.

Awesome memory, but at a cost.
 
8 Pack said:
CL9 2666 is where its at man on Ivy E. Although C8 2133 is ok for sure. PSC will go C7 2400 though.

These Samsungs you recon??

Test 2666 C9-12-12-25 or 28 1.92 just try.

Try TRAS 20 or 21 also.
Click to expand...

Can do 9-12-11-21 t1 at 2400 @ 1.67. Will put 1.9 through it and do as suggested. Although need 1.19-1.2v vcsaa for 2400. Not sure if Sammy IC will check out later
 
I wouldn't run 2666 24/7 especially at that voltage. The RAM would be fine with but the cpu definitely won't thank you for it. It's good for short runs though.

I'm running a 4960 @ 4.77 1.380v and three 780ti
 
Yeah will do, just having a play now with cl8 still

@1.7v

2064Mhz (8-9-9-27-T1)

Capture.jpg
 
IMC is rated for up to 1.65v by Intel so running 1.9v through it will potentially kill your cpu indirectly, but very slowly lol. Short runs are fine but any more than 1.8v 24/7 you'll degrade it
 
Neil, cheers for that those are working for me at 1.65v although I'm at cl8-10-9-21 t1 1.65


Edit: Holy ****...


STOCK 780Ti Tri SLi



Untitled.jpg
 
Last edited:
It's not that exciting, I should have removed the holy ****. I forgot I had SLI enabled :D.

The Physics score for Catzilla is still pretty high though. Stock GPUs and 2300. Was previously getting around 2100 at same CPU clocks withs GPUs at balls to wall. Bench just loves tight memory.

Here's my efficiency now though after trying Neil's timings (same kit)

Still @ 1.65v. Can't seem to get 8-9-9 without more volts

Capture.png
 
Last edited:
Cheers Pack will give it a go later. Still not tried ramming c92666 through it but leaving that till last as will only be for short runs obviously.


Heres 1.7v @ C9-11-11-21-T1-5-124 1204

http://cdn.overclock.net/2/27/27e10abd_2400.jpeg

** Please rehost as hotlinking isn't allowed. Also please resize image to no more than 1280px wide before replacing image tags - thanks **
 
Last edited:
Have dropped twcl to 6 at cl8. 30 odd points on efficiency. Also broke 18k physics in FS at 4.77 which was previously what I was getting at 4.8.


Edit: need more volts for that. Aiming to get as tight as possible @1.65. Crashing out to anything below 8 twcl
 
Last edited:
Update.

With these now@

4.5Ghz Vcore offset 0.010+ (1.264- 1.280v)

VCCSA 1.0v

VTT @ 1.0v

C8-10-10-28-CR1-88 @ 1.62v

247.jpg

Think that's me done with these for C8, can't seem to get any lower without going over 1.75v :)

Definitely worth the money IMO :)
 
It would be nice work, was just testing stability @ 4.6 and was getting some crappy throughput speeds. Reboot to adjust multi and had BSOD on reboot - now one of the sticks won't work and is showing abnormal in SPD reader in BIOS :(

at no more than 1.62v!

IMG_0506.jpg
 
You must log in or register to reply here.
Back
Top Bottom