corsair psu cables

[ashagplz]

anyone know if its possible to buy spare cables for the corsair psu? it only comes with a couple of molex cables and i want to use it in a molex only rig....

 

[PhillyDee]

Try the MM, post in the wanted section. There might be a couple of people willing to part with theirs. Otherwise just buy the molex plugs and make your own . . .

 

[marc2003]

i have 3 cables in mine. 2 have 3 molexes on, the other has 2, so that's 8 altogether. (not even counting the fan only splitter) - surely you don't need more than that?

 

[james.miller]

do you have a 620w marc2003? he may have the 520w which odesnt have as many cables

 

[marc2003]

nope, 520w.

 

[MeatLoaf]

I have the 520w and have the same cables mark mentioned above

 

[ashagplz]

i have the 620..yeah i know you get that many in total..but you dont get to use all the rails....i wanted to use it in a case with an agp slot..so the graphics will be a 2 molex to pci-e..and its best to have both those on seperate rails..meaning i need to have extra cables to split the load better..

 

[james.miller]

the psu's only have one 12v rail so dont worry about it.

 

[MeatLoaf]

the psu's only have one 12v rail so dont worry about it.

They have 3 dont they?

 

[james.miller]

not exactly. the have 3 'virtual' rails to comply with atx standards but in reality its one big rail. we know this because the psu has been taken apart and varified, also johnnyguru manages to place a 40amp load on one of the 'rails' on the 620w psu's and it ran rock solid stable.

you cant do that if it has 3 seperate rails the bottom line is, stop worrying. this psu can power 2 8800gtx's, it'll handle any agp card you can throw at it without even noticing.

 

[ashagplz]

ok..i thought it had seperate rails but can 'borrow' from another rail if needed..but if its one real rail then thats good....