Corsair Vengeance LP 1.35v

JP1911 · 6 Apr 2012 at 14:52

Iv been looking at the above ram for my asrock h67 itx/Ht build due to its low voltage but my board only supports 1333 is this a problem with the Vengeance being 1600? and does anyone know of any other low voltage ram or is this the best?

chilipeppersc · 6 Apr 2012 at 14:58

No it isnt a problem. It will resort to a 1333 setting by default. My mITX PC currently has the same issue with my dual vengeance high profile memory but it works fine.

Surveyor · 6 Apr 2012 at 15:05

Possibly:

Samsung Green 8GB (2x4GB) DDR3 PC3-12800C11 1600MHz 30nm Dual Channel Kit

It'll probably run 1333MHz at pretty low voltage.

JP1911 · 6 Apr 2012 at 15:49

Is that ram suitable for the mobo ? Might just be the picture but it looks too big

wazza300 · 6 Apr 2012 at 15:56

JP1911 said:
Is that ram suitable for the mobo ? Might just be the picture but it looks too big

ddr3 is ddr3,its all the same size,its very low profile and will work with your mb

Surveyor · 6 Apr 2012 at 15:58

JP1911 said:
Is that ram suitable for the mobo ? Might just be the picture but it looks too big

It'll fit in any motherboard which takes DDR3.

The RAM is very low profile:

Edit:

It should also easily run 1333MHz at less than 1.30V, quite possibly a fair bit less.

JP1911 · 9 Apr 2012 at 10:54

Before i order one of these does anyone have any other options or are these two the best? they seem pretty good to me but you never know

Surveyor · 9 Apr 2012 at 11:27

G.Skill make some 1.35V and 1.25V 1600MHz DDR3 but it's not available from OcUK.

It's much taller as well.

They also make some 1.35V 1333MHz DDR3.

The same sort of height as Kingston HyperX or Corsair XMS3.