CPU VTT

Spils

Spils

Spils

Associate
Joined
29 Sep 2009
Posts
1,643
Guys whats the max the CPU VTT should be hitting on a i5 2500k.

Just noticed on mine its spiking up to 2.868 when gaming im sure I read it shouldn't go about 1.2 ????????

Its set to auto not sure why its spiking so high it normal hovers around 1.044 pc is only a few days old so just trying to get my head round it all.

Mobo is a gigabyte z68x ud3h

Full size SCREEN SHOT
http://i39.tinypic.com/eqv991.jpg


Shrunk
2nscfmu.jpg
 
Last edited:
2x4gig stick. The cpu VTT sits at around 1.044 most the time from what I can see, But ive been testing HW running in the background while I had a game last night when i finshed I was surprised to see that figure.

Just going to post a screen shot now ill add it to the OP. My TMPIN1 seems very high to from what i can understand that sensor is the motherboard sensor. Is it getting a false reading ? I have very good case cooling. It should be no where near that after a few hours gaming with a low OC for now.
 
could be a false reading,look in easytune/tuner/advanced/voltage and see what the target is for cpu/vtt

that's usually right
 
Is there anything else that reads that sensor ? I'd like to make sure as I no above 1.2 can really limit the life of the chip. Anything I can record the sensor with to see if its a spike as I think. Or if its climbing to that at random points.

The OCD is kicking in lol :(
 
try aida64 trial version

I havn't seen any threads on cpu/vtt overvoltage beforeso im guessing its fine
 
@wazza300 did further testing mate weekend, its not a false, sensor my cpu VTT is spiking to dangerous volts. Did 2x 3 hour gaming sessions with monitoring tools in bg running. With load line calibration disabled the cpu Vtt stays where it should.


Going to re-enable load line tomorrow and test with it back on after work. But with it off it seems to stop the spike.
ocnolineload.jpg
 
You must log in or register to reply here.
Back
Top Bottom