Debezzelling
- Thread starter skyripper
- Start date
Have a look at Widescreen Gaming Forums Bezel Removal
So I had a crack at taking the casing off one of my monitors and managed it ok. I also discovered my monitor had the VESA holes into the metal frame inside, unlike some which have them in the plastic outside casing. Which is good, as it means I'll be able to put three of them on some kind of mount rather than trying to Picture Frame them.
So from this..
To this..
Its not a massive difference, but I reckon its worth doing to the other two monitors. Need to work out my mounting method next.
Viewsonic VX2260 stripping instructions (this will void your warranty and you could break a working monitor)
So from this..
To this..
Its not a massive difference, but I reckon its worth doing to the other two monitors. Need to work out my mounting method next.
Viewsonic VX2260 stripping instructions (this will void your warranty and you could break a working monitor)
- Flip over
- Undo the four screws holding the desktop stand on
- Remove the screws completely
- Push a very thin bladed screwdriver between the casing pieces, making sure not to push it in too far or hard
- Slowly work around the frame, undoing tabs until both halves of the plastic casing are apart
- Remove the back
- Undo the screw holding the buttons
- Unclip the speakers
- Unclip the PCB with the power and menu buttons on
- Carefully remove the front plastic
- Put the metal cased insides face down on a towel