desperate help needed!!!! please :)

Awahwah said:
You guys are lucky, I'm stuck (well stuck ish) at 3GHz (Q6600 G0) with a dreeded Nvidia 680i chip set. Though some peeps say i did well to get it to 3GHz.
Click to expand...


I have heard that the 680i chipset was a bit of a beast to oc, but then again I was told to that I would have massive problems ocing a quad on a 780i board which I found to be relatively simple. Keep trying man you may just surprise yourself.:)
 
thedan55 said:
i found the setting to set the multi, on my board its called "ratio cmon setting"

so ive set it to 12 with an fsb of 291 which gave me 3.51...ish

i run prime 95 and i get a bsod almost straightaway, here are my settings..

VCC- 1.39375
PLL- 1.57950
VTT-1.40475
DRAM V- 1.83975
NB CORE- 1.56375
SB 1.5V CORE- 1.57950
SB 1.1V CORE- 1.15300

Any of these look strange to you or have any changes or suggestions?? am going to run the custompc benchmarks and see if that finishes.
Click to expand...

The MF2 is a P45 board, those NB voltages are very high and almost certainly will cause you issue.. you shouldn't need more than 1.3v, 1.4v for 500FSB+
 
hey lads i bet your all sick of me by now lol

ive got my fsb at 266 and the multi at 12

these are my settings

vcc- 1.28125
vtt- 1.17950
nbc- 1.19275

windows boots up very fast but prime95 fails on core 3 every time! :eek::confused:

no matter what i try it keeps failing on core 3 sometimes core 2 i just dont know what to do now!!!
 
You must log in or register to reply here.
Back
Top Bottom