• Notice regarding image hosts and attachments. See here.

Dismantling PS2 slimline

Soldato
Joined
30 Sep 2006
Posts
5,289
Location
Midlands, UK
As the title suggests, could anyone tell me please?

My son's PS2 slimline keeps turning itself off (green light > red light) during gameplay. His mum already bought a brand new Sony power supply, but its no different. The connection is very touchy. And i personally think that the very slight vibration of the disks spinning up is enough to kill the connection and via. As a result she has put a piece of rubber between the power connecter and the other cable thus pushing both apart slightly. This actually works, but its not a good fix really.
So.....i wanna dismantle it (its out of warranty anyway) and see if there is anything obvious. I've taken the 2 rubber feet off, taken the 2 screws out, but it doesn't seem to want to pull apart. Is there anything i'm not doing correctly?

Urgent advice would be greatly appreciated as xmas is around the corner and my 8 year old has a loads of PS2 games on his santa list.

Cheers
Jacko
 
there should be 6 screws under each one of the little rubber feet. If you've got a v13 or v14 slimline, the warranty sticker will be covering one of these screws.

I dont have a ps2 but I googled for a guide to taking it apart, I cant link to it because the guide is actualy for doing bad things to your ps2.

here is the pic from the site (I rehosted it)



hope that helps.
 
All the feet are there, but only 2 are removable to reveal screws. The others are stuck down with glue.
The warranty sticker on ours is on the side, so you'd need to slice it in half to be able to dismantle the ps2.

Hmmmmm :(

I googled for ages and couldn't find a guide to opening up the slimline models.

Oh....thanks by the way. :)
 
you HAVE to remove all the feet. there screws are under there. Id give you a like to instructions but they are on a site that sells modchips as said, so we cant.
 
james.miller said:
you HAVE to remove all the feet. there screws are under there. Id give you a like to instructions but they are on a site that sells modchips as said, so we cant.

Ok thanks, i'll have to pry them off then and have another go.
 
ok, im into the guts, but to be honest, cos its the power connector that seems to be the problem and i thought it might be loose or dodgy, but its not its secure, so i don't really know what i can do. :(
 
k.Jacko said:
ok, im into the guts, but to be honest, cos its the power connector that seems to be the problem and i thought it might be loose or dodgy, but its not its secure, so i don't really know what i can do. :(

hard to say m8, blob of solder in the right place might tighten the fit but depends on your expertise. Maybe take it to a tv/video repair place? they'll get it done but then probably cost as much as a second hand PS2 frankly.
 
Sounds like the console has either been living with its power cable stressing the connector (crushed up towards the back of a cabinet perhaps?) or maybe it's always being unplugged and replugged as its moved around?

This happened to my 'big' ps2...simply resoldered the power pins connected to the back connector, as they looked a bit dodgey, and it was fine since...well it doesn't read discs now, so will have to rip it apart again! it is getting old though, was bought soon after launch.
 
LadFromWales85 said:
Sounds like the console has either been living with its power cable stressing the connector (crushed up towards the back of a cabinet perhaps?) or maybe it's always being unplugged and replugged as its moved around?

Actually mate, it just sits on a table with nothing pushing against it and it gets moved so very rarely it has its own dust shadow. :rolleyes: It is the 2nd Sony power cable, but thats cos his mum bought a new one thinking that was the problem. You only have to touch connector slightly toward the outside edge of the console for it to connect ok.

Its so tight in the console that i wouldn't know how to try resoldering :(
 
Back
Top Bottom