Display Driver Stopped Responding...

[Gregster]

I have only dealt with NVIDIA cards and volts but it should be the same. Set volts and save profile? Maybe somebody like Dave Beast can help as he is good with AMD cards.

 

[tommybhoy]

Tried ticking the 'Unlock voltage monitoring'?

[ATIADLHAL]
EnableUnofficialOverclocking	= 1
UnofficialOverclockingEULA	= I confirm that I am aware of unofficial overclocking limitations and fully understand that MSI will not provide me any support on it
UnofficialOverclockingMode	= 1
AccessibilityCheckingPeriod	= 0
UnifiedMemoryUsageMonitoring	= 1

And does your MSI config contain the above?

If the above doesn't work, you could try Sapphire Trixx or maybe give His iturbo a go, it has disable ulps feature too but I don't have a clue if all the features work with XFX:

http://www.hisdigital.com/un/news_show-237.shtml

Only use one tool at a time though.

 

[chipachap]

You have to go up in increments of +.007 or .006 I think

 

[shankly1985]

You have to go up in increments of +.007 or .006 I think

That worked went up to 1037 and it saved.

Thanks

 

[shankly1985]

Tried ticking the 'Unlock voltage monitoring'?

[ATIADLHAL]
EnableUnofficialOverclocking	= 1
UnofficialOverclockingEULA	= I confirm that I am aware of unofficial overclocking limitations and fully understand that MSI will not provide me any support on it
UnofficialOverclockingMode	= 1
AccessibilityCheckingPeriod	= 0
UnifiedMemoryUsageMonitoring	= 1

And does your MSI config contain the above?

If the above doesn't work, you could try Sapphire Trixx or maybe give His iturbo a go, it has disable ulps feature too but I don't have a clue if all the features work with XFX:

http://www.hisdigital.com/un/news_show-237.shtml

Only use one tool at a time though.

Thanks copied the above and saved, but it still didn't work I need to adjust by .006+

 

[chipachap]

Thanks copied the above and saved, but it still didn't work I need to adjust by .006+

You won't be able to adjust the .006 either. It's built into the hardware of the board in the way it adjusts voltages IIRC. There's no harm in going up .006 or even .012 if you feel you have to. But as a rule of thumb for beginners just keep going up in .006 increments.

 

[shankly1985]

You won't be able to adjust the .006 either. It's built into the hardware of the board in the way it adjusts voltages IIRC. There's no harm in going up .006 or even .012 if you feel you have to. But as a rule of thumb for beginners just keep going up in .006 increments.

Yer I just went from stock 1031 to 1036 not tested bf3 yet tho but have run heaven for a full test. My card is oc 1000/1500 but voltage is all completely new to me so hopefully I don't need to touch it again lol

 

[shankly1985]

Upto now bf3 running great no crashes yet but only played couple games last night. Tonight will be a proper test as I have no work tomorrow. Will post back if I have issue again.

 

[shankly1985]

Looks like the voltage has solved me issue. No crashes since thanks to tho's who helped

 

[chipachap]

Looks like the voltage has solved me issue. No crashes since thanks to tho's who helped

Np Glad it's sorted. GPU issues are the worst.