Associate
- Joined
- 24 Aug 2019
- Posts
- 3
Hello, I have just completed my first new build. Everything works fine, however when I enable D.O.C.P in BIOS the system double boots everytime, is this normal?
So when D.O.C.P is not enabled, I press the power button on the case and it turns on and boots up first time. When its enabled and I press the power button on the case, motherboard comes on for about 1 - 2 seconds, turns off for 1 - 2 seconds, then comes back on again and boots normally. It only does it when I press the power button on the case, makes no difference if I unplug it from the wall. If I restart computer from windows it doesnt do the double boot, its only when starting the computer from an off mode.
I really dont know too much about computers only the basics, but this doesnt seem normal to me.
I have changed no other settings in BIOS other than DOCP, and I have just turned it on, i havent changed any values or anything. DOCP has picked up correct values of RAM 16-18-18-38 @ 1.35v (which is what it says on the ram box).
I have latest BIOS installed.
I have QVL list RAM installed ( G.Skill F4-3200C16D-16GTZR )
RAM is installed in bays 1 and 3 as per manual.
System is X470 Crosshair Hero VII, 16GB of above RAM, bequiet PSU 750w, M.2 primary drive, Ryzen 7 3700x (not overclocked), sapphire nitro+ vega64 GPU.
So when D.O.C.P is not enabled, I press the power button on the case and it turns on and boots up first time. When its enabled and I press the power button on the case, motherboard comes on for about 1 - 2 seconds, turns off for 1 - 2 seconds, then comes back on again and boots normally. It only does it when I press the power button on the case, makes no difference if I unplug it from the wall. If I restart computer from windows it doesnt do the double boot, its only when starting the computer from an off mode.
I really dont know too much about computers only the basics, but this doesnt seem normal to me.
I have changed no other settings in BIOS other than DOCP, and I have just turned it on, i havent changed any values or anything. DOCP has picked up correct values of RAM 16-18-18-38 @ 1.35v (which is what it says on the ram box).
I have latest BIOS installed.
I have QVL list RAM installed ( G.Skill F4-3200C16D-16GTZR )
RAM is installed in bays 1 and 3 as per manual.
System is X470 Crosshair Hero VII, 16GB of above RAM, bequiet PSU 750w, M.2 primary drive, Ryzen 7 3700x (not overclocked), sapphire nitro+ vega64 GPU.
