DS4 Owners - Please show us your BIOS (MIT) settings please!

Virdi

Virdi

Virdi

Soldato
Joined
11 Jun 2004
Posts
4,219
Location
Middlesex, London
Hi all,

I've just built up a new rig for a friend - based on a DS4 board and e6400 cpu.

I can't get it past 300FSB - So please can you show your BIOS settings.

I've also tried various RAM: Crucial Ballistix, Corsair and Micron.

Thanks
 
Can the DS4 board take a core 2 duo CPU stright from the box. Without needing a BIOS update?

I'm upgrading from AMD and don't have any other skt 775 chip other than the e6300?
 
@Virdi:What ram are you using right now then? I hope to get within a week my rig, I ordered a few weeks ago but the PSU is taking so long... :(


@FireMoon,djkav; Don't spam his thread here, there is a thead for /in/ and compatible ram for the DS3, DS4 & DQ6 and its stickied at the top of this forum.
 
problem is resolved guys.

It's amazing what a BIOS upgrade can do ;)

it's now running at 425x8 = 3.4Ghz and it's been running Prime for abt 45 mins

Will post screenie's later

p.s. - I'm running Crucial Ballistix RAM (DDR667) - and it appears to be running fine at 425 ;)
 
Last edited:
Virdi said:
Hi all,

I've just built up a new rig for a friend - based on a DS4 board and e6400 cpu.

I can't get it past 300FSB - So please can you show your BIOS settings.

I've also tried various RAM: Crucial Ballistix, Corsair and Micron.

Thanks
Click to expand...

hope this helps click me I am using a DS4 and E6400 also..This is 3ghz settings at stock everything ram timings are 4-4-4-12
 
Last edited:
Screenie

e6400, DS4, Ballistix PC5300, AC Freezer Pro, Cheap but good CWT (450w) PSU - lol

Rig is not inside a case yet...

puppsvirdi-3_4_conroe.JPG


It's been priming for about 2 hours now :)
 
Last edited:
You must log in or register to reply here.
Back
Top Bottom