• Notice regarding image hosts and attachments. See here.

Dumb questions

Associate
Joined
16 Jan 2012
Posts
301
Two easy ones for you:

With a mainstream manufacturer pre built PC, which component initiates the companies logo during startup? (before the windows loading screen)

If you remove a hard drive with any version of Windows installed and put it in another PC, will everything (Windows wise) be exactly the same?

Thank you
 
If you remove a hard drive from one PC to another chances are that Windows will not load.

The Logo you refer to at power on comes from the motherboard but with many pre built mainstream PC's these boards are built for the manufacturer and will include their logo.
 
I think it'll only work if the hardware of the second computer is pretty much the same. Essentially windows doesn't run "live".

I have a few servers at work that i've swapped the disks into a different server (exactly the same hardware) and that works.
 
Last edited:
ok thanks. Technically, why is it that Windows won't neccessarily load?

Are you saying take a single hard drive from one computer and put it into the new computer as the only hard drive?

If so, that won't work if the hardware is not identical, as I believe you need all the right driver programmes for the particular hardware, e.g. graphics drivers, for Windows to load.

I'm not a hardware expert but these are my thoughts.

Rgds
 
i think windows will load if the hadware is compatible. but it needs to be a retail copy of windows so you can activate it, if OEM then it is tied to specific hardware platform. then it will search for appropriate drivers via windows update.

otherwise i would need to reinstall window everytime i change my GPU, RAM, PSU or add a HDD etc... ;)
 
You can back up windows and use the other hard drive on another pc but if it has a OEM copy of windows usually supplied on the big pre built companies pc's then you may have a harder time activating it, could try using the phone number and telling them your mob fried or summit. The link to the hardware is only to the motherboard by the way. by using the below method you remove drivers on ur system pretty much so back up what you will need on a memory stick or something.

http://www.sevenforums.com/tutorials/135077-windows-7-installation-transfer-new-computer.html
 
Last edited:
I changed everything in my comp (cpu/mobo/ram) and I was expecting to have to reinstall windows 7 but alas this wasn't the case. windows loaded up then I just installed the new drivers.
I will say i have never known this to happen before and I have tried with a couple of computers when I have replaced a mobo but no go.
Maybe this is a new feature with windows 7? I am not sure but basically you will be doing the same by swapping a HDD to another computer.
 
Ok I see. Your comments make sense, and I'm learning :) Im sure this is also a dumb question: If I removed a hard drive from one PC with vista installed and put the hard drive in another PC with a Windows 7 disk, I could boot from disk and install 7 over Vista?
 
Ok I see. Your comments make sense, and I'm learning :) Im sure this is also a dumb question: If I removed a hard drive from one PC with vista installed and put the hard drive in another PC with a Windows 7 disk, I could boot from disk and install 7 over Vista?

yes. but the win 7 installation on the other HDD would be deactivated, since you would need to activate win7 on the new install (the HDD w/ Vista). personally i would reformat the HDD with vista to have a clean install and avoid any potential issues, and maximize HDD space
 
Ok I see. Your comments make sense, and I'm learning :) Im sure this is also a dumb question: If I removed a hard drive from one PC with vista installed and put the hard drive in another PC with a Windows 7 disk, I could boot from disk and install 7 over Vista?

As above. Do a clean install.
 
Back
Top Bottom