E6300 First OC

IAmATeaf · 17 Feb 2008 at 15:15

Set you memory multiplier to 2 then start ramping up the FSB

A2Z · 17 Feb 2008 at 15:29

my 6300 is @ 3ghz, 430x7, cant remember if i changed the vcore or not, but CPUZ shows 1.28V so im guessing its stock?? and RAM is at 1:1 so also 430, TAT shows temps are @ 55 degrees, does this seem a bit high? never tried to clock higher i dont think

Lethal` · 17 Feb 2008 at 15:36

Would seem a bit high if that is idle, load would be 60+

Lethal` · 18 Feb 2008 at 22:46

IAmATeaf said:
Set you memory multiplier to 2 then start ramping up the FSB

Hmm... I went into my bios and looked for a setting where I can change the memory multiplier but could not find it. Any ideas? And I presume setting that to 2 overclocks the RAM?

Lethal` · 19 Feb 2008 at 16:37

Anyone?

mame · 19 Feb 2008 at 16:53

stopsign104 said:
Hmm... I went into my bios and looked for a setting where I can change the memory multiplier but could not find it. Any ideas? And I presume setting that to 2 overclocks the RAM?

There might be an option saying something like memory speed/timings: AUTO. If you change that to manual then the extra options should appear. Bios's can vary a lot. memory multiplier 2 might show as 1:1