EK DCP 4.0 vs Laing D5

OK Laing D5 fitted and tubing redone. Spent nearly an hour moving case around to get trapped air out, and i am confident all air is now gone

Checked temps within windows at stock idle and cpu was around 22 degrees

Under OCCT linpack hitting 68 degrees at 1.24v (4Ghz)

Still seems a tad high for me, i will test at 4.5Ghz later 1.35v and see what the temps go up to

Are these just very hot chips? My 3930k was much cooler

GPU temps have dropped under load to 49 degrees though, so the trapped air was making a good 5 degrees difference

Look at the temps this guy is getting and this is on air with 1.30 volts?

http://www.overclockers.com/forums/showthread.php/749698-Man-why-such-high-temps-on-a-4960X
 
Last edited:
Pics! :D

His in the link could be an exception tbh. Stress test like occt do put the CPU under abnormal loads. See what temps you get while gaming !

It could be a mounting issue like stated before, I don't think the loop had/has problems going on the fact the 295x2 is staying cool.

Side note. What's the noise difference between the dcp and the d5 like?
 
Noise wise it's honestly much the same

Got the pump on 5, and its maybe a tad louder than the EK

I was expecting a crazy flow rate, and its not really any better than the EK!

Also remounted my CPU block, and seems like its on OK
 
Last edited:
Well i changed my waterblock from a Supreme HF to a Supremacy EVO and its dropped my temps by nearly 15 degrees

Either other waterblock is faulty or it just wouldn't mount properly

Good news though!
 
somewhatdamaged said:
Noise wise it's honestly much the same

Got the pump on 5, and its maybe a tad louder than the EK

I was expecting a crazy flow rate, and its not really any better than the EK!

Also remounted my CPU block, and seems like its on OK
Click to expand...

Seem to think the dcp 4 has a higher flow rate than a D5 but maybe wrong.

Well i changed my waterblock from a Supreme HF to a Supremacy EVO and its dropped my temps by nearly 15 degrees

Either other waterblock is faulty or it just wouldn't mount properly

Good news though!
Click to expand...


Glad its sorted, More like it wasn't mounting correctly I suspect
 
You must log in or register to reply here.
Back
Top Bottom