Fan controller for delta?

manbearpig · 24 Jul 2010 at 19:07

Would this fan controller be ok for a delta 120mm fan? because im pretty sure I cant plug it straight into my motherboards fan header because it will blow it up.

The only connection on the fan is a 3 pin.

Will that fan controller be able to handle 24w, this is the specification:

Specifications: 120x120x38mm, -->190.00<-- CFM @ 4000 RPM, 59.0 dBA, 24.00 watts, 2.00 amps, 12v DC, 3+4 pin Molex connectors.

Thanks

PhillyDee · 24 Jul 2010 at 19:10

You willl have to find out the maximum current it can handle, and make sure the delta is within that.

manbearpig · 24 Jul 2010 at 19:49

Thanks, the fan controller wont be suitable, it can only take a maximum of 6v. Can you recommend anything else that would do the job?

KarlMcWade · 24 Jul 2010 at 20:37

Any of the Lamptron Fan Controller range will do they go up to 45w per channel

momo56 · 25 Jul 2010 at 02:12

KarlMcWade said:
Any of the Lamptron Fan Controller range will do they go up to 45w per channel

Lamptron fc2 to be specific. Has 6 channels that can do 45W each so 270W in total. Costs about £30. Although I had to file a corner down for it to fit.

bifday2k · 25 Jul 2010 at 02:34

Sent u a link in your trust manbearpig, to a site selling the lamptron @ £25.99

manbearpig · 27 Jul 2010 at 20:05

bifday2k said:
Sent u a link in your trust manbearpig, to a site selling the lamptron @ £25.99

Thanks, I only just checked me emails