fao cleeecooo or anyone else re tj07

zx|muppet · 4 Jul 2012 at 14:45

and more questions

with regards to the fans on the rads.. do i put them both to pull out the case? or am i going to be better having the 240 push into the 480 and the 480 pull out the case?

zx|muppet · 7 Jul 2012 at 11:49

anyone help me with regards on how to set the fans please!?!?!

Avathar77 · 7 Jul 2012 at 16:43

I used to have 2 RADs at the bottom(480 & 240).
480 fans on push(air from out side) and 240 fans on push as well(air from in side the case)
SO 480 rad fans taking Air in to the case and 240 rad fans blowing air out.

zx|muppet · 7 Jul 2012 at 17:41

meh all set up already.. think i got em both on pull.. i just ordered rad stands. think i got all the tubing route sorted now.. you might have to lol at some of it tho! and im shocked that i didnt have to use any 90deg fittings

zx|muppet · 7 Jul 2012 at 20:07

so been working on ze pc today and got most the watercooling plumbed in

now just waiting on rad stands and some braided cables...

GoogalyMoogaly · 7 Jul 2012 at 21:12

Wouldn't it be better to have the fans blowing in the same direction rather than having them all blow into the middle?

zx|muppet · 7 Jul 2012 at 22:56

i thought that was both pulling..

maybe im wrong then... bleh nps tho.. was just trial fit can be sorted

GoogalyMoogaly · 7 Jul 2012 at 23:03

Nope, fans almost always blow towards the side where the struts that hold the centre of the fan are.

There should also be arrows on one edge of the frame showing the direction.

zx|muppet · 7 Jul 2012 at 23:18

yeah i looked at the arrows.... im sure they were on pull! nps i can check tomorrow

Biffa · 9 Jul 2012 at 19:22

GoogalyMoogaly said:
Wouldn't it be better to have the fans blowing in the same direction rather than having them all blow into the middle?

I think its best to experiment and find what works best for you, I have both mine pushing air out on either side. I just didn't fancy one radiator blowing hot air into another.

zx|muppet · 9 Jul 2012 at 19:25

so having both to pull out the case is also ok biffa? if so i think thats the way im going to go with this only thing thats a bit meh is i wont have the nice fan part showing

zx|muppet · 4 Aug 2012 at 22:47

done

now all i need to do is sort out the aq5... still confusing trying to set it up and figure how to use the temp sensors!

Cleeecooo · 4 Aug 2012 at 23:10

Lovely

zx|muppet · 4 Aug 2012 at 23:21

think i have a slight airlock still...

i can hear it and see some bubbles now in the cpu block.. running prime to see if i can get the water hot and then when i get home from work i will release the fill point on the res..

or what else can i try?

Avathar77 · 5 Aug 2012 at 00:52

Tilting the case helps a bit!

Are those rear fans blowing air in to the case?

zx|muppet · 5 Aug 2012 at 01:09

I ain't got a clue.. I didn't look as they were on there when I got it...

zx|muppet · 5 Aug 2012 at 05:23

and now the pc is hanging on bios code a6 and i have no vid output.. FUN!

zx|muppet · 9 Aug 2012 at 22:26

Right its all working again and reseated the cpu block.. Gonna run it for 24 hours to get rid of any air bubbles.. What setting shall i leave the d5 on?

Cleeecooo · 9 Aug 2012 at 22:29

Max powah!

Also, try turning it on an off again quickly for bleeding.

zx|muppet · 9 Aug 2012 at 23:24

Shall i leave the res fill port open cleeecoooo?