Final spec check

Associate
Joined
1 May 2011
Posts
100
Location
Southport
Just checking everything will be okay before I order

Corsair Graphite 600T Midi Tower Case - Limited Edition White £139.99
(£116.66) £139.99
(£116.66)
XSPCX2O 750 Dual 5.25” Bay Reservoir Pump £57.98
(£48.32) £57.98
(£48.32)
XSPC RayStorm CPU WaterBlock (Intel) **2011 Compatible** £49.98
(£41.65) £49.98
(£41.65)
XSPC EX240 120mm Radiator - Black £39.98
(£33.32) £39.98
(£33.32)
XSPC EX120 120mm Radiator - Black £29.99
(£24.99) £29.99
(£24.99)
Sharkoon Silent Eagle 2000 120mm Fan - 3/4 Pin £10.99
(£9.16) £32.97
(£27.48)
Masterkleer Hose Pack PVC 15,9/11mm (7/16ID) UV-Reactive White 3.3m £10.88
(£9.07) £10.88
(£9.07)
Silver Anti Algae Kill Coil - Pulse £3.98
(£3.32) £3.98
(£3.32)
EK PSC Compression Fitting 7/16 [16/11mm] - G1/4 - Nickel [3831109845011] £2.99
(£2.49) £23.92
(£19.92

Any alterations I should make?

j0sh
 
Hey
You seem to have all the bits you need, though I don't know about the quality of the XSPC stuff I'm afraid, someone else may be able to help you
I know 'slightly' more than nothing ;)
 
All good. The rad you're getting is supposed to be on par with the thick rads (basically, good)

I would personally switch the res/pump for a laing DDC as it's more powerful, but it's up to you
 
Looks good, i'm not the biggest fan of that bay res/pump but i have never used one either. If your going for uv get led flexlights rather than cathodes, a lot brighter effect. Also buy your self a decent hose cutter, makes life so much simpler and gives a perfect cut every time. Psu bump start bridge is handy as well, saves any embarrassing moments with a paperclip if your not too sure.
 
Last edited:
Thanks for all your advice, it's helped a lot :D

The main reason I went with the res/pump combo was cost, and I also think it'll look tidier when I have everything installed (as it's all in the top of the case)

Also I dont plan on using UV light, I went with the tube simply because it's white, and in this case I think it'll look great , other builds have proved it too :P

j0sh
 
Thanks for all your advice, it's helped a lot :D

The main reason I went with the res/pump combo was cost, and I also think it'll look tidier when I have everything installed (as it's all in the top of the case)

Also I dont plan on using UV light, I went with the tube simply because it's white, and in this case I think it'll look great , other builds have proved it too :P

j0sh

get a better res pump combo.

buy a laing DDC pump and a res to house it :)
 
Hmm, I shall look into it I think, is it really that bad though?

Funds are limited, but I'd rather pay a little more and get something decent
 
But if i do that I'll end up going

"may aswell get that, and that, and that, and that, and that, and that, and that, and that" until my basket costs a small fortune :D
 
But if i do that I'll end up going

"may aswell get that, and that, and that, and that, and that, and that, and that, and that" until my basket costs a small fortune :D

I did the same. initial budet £200.

Currently i've spent over £600 :O

worth every penny though :D:p
 
Back
Top Bottom