Final Spec Check

I could get 16gb, but as most people say, not really worth it :p

Then again... £30 for some sexy looking RAM!
 
Last edited:
The fan I need to remove for the Antec cooler, is it this one?

ocuk.png


Also, read a couple of reviews of it being a bit loud?
 
Four screws, you pick up a crossheaded screwdriver, insert the pointy end into the screw and rotate counter-clockwise till one screw is removed, repeat this for the other three. Then place the fan in the roof lining up the four holes and screw the four screws back in turning the screwdriver clockwise.

Not hard at all.:p
 
*gutted, that MB is out of stock

http://www.overclockers.co.uk/showproduct.php?prodid=MB-188-MS&groupid=701&catid=5&subcat=1990
http://www.overclockers.co.uk/showproduct.php?prodid=MB-360-GI&groupid=701&catid=5&subcat=1990
http://www.overclockers.co.uk/showproduct.php?prodid=MB-337-GI&groupid=701&catid=5&subcat=1990

You still get the VAT back on that MSI till the 21st.

The UD5 is missing Lucid+Quicksync as it doesn't have a display connector for the IGP of the CPU, it does have a 20 phases CPU VRM setup though.

The Z68XP UD3P does have Luicd+Quicksync etc, it has 12 phases for the CPU, don't confuse this board with the £2 cheaper Gigabyte Z68X-UD3P
 
Well I've totally screwed that last post up... haha. Don't I lose 2 years Warranty on a OEM Processor though? But for a Tenner saving's do they ever break? I'm only going to over clocking a normal amount - so not really too heavy for it to break. But knowing my luck...
 
£12 difference, I will leave that for you to decide:p

One bit of advice, as soon as you get the motherboard, check the little pins in the socket for any that look busted/out of shape.

They should look like this,
cpusocket.jpg
 
Last edited:
£12 difference, I will leave that for you to decide:p

Heh, I think for the security I'd rather have it on 3 years.

stulid, thank you for all your help. Just going to go and place the order now. Going to be picking it up as I'm not paying £19 for it to be delivered tomorrow when it will cost me a tenner in petrol!

As for the edit, I can just open it when I'm at the OcUK place I would think?
 
Last edited:
As for the edit, I can just open it when I'm at the OcUK place I would think?

Brilliant thing to do, they then can't blame you for damaging it.

the pins will look like the above pic, all bent at an angle, but if any look out of place then dont take it.
 
Last edited:
Brilliant thing to do, they then can blame you for damaging it.

the pins will look like the above pic, all bent at an angle, but if any look out of place then dont take it.

Okay thanks. Order placed. Will get some pictures put up :)
 
All together now! :) Just want to say thank you for all the input!

If anyone wants to know, I'm currently running this at 4.6GHz (OC on the Motherboard) without any immense increase in Temperature, infact, the Kuhler is still kicking cold air out the back of the fan.

Also, the GFX card is a bit big for the case (had to take out the 4 harddrive enclosure thing), but there's space for 2x HDD's, so it's alright :)
 
Back
Top Bottom