First time loop, problems with spec

seth1969

seth1969

seth1969

Associate
Joined
5 Dec 2013
Posts
546
Location
tother side of clunde
So I bought a load of wc gear last Thursday to do the loop over the weekend.
List gear bought is as follows
2x coolstream pe 240 rads
4x noise blocker eloops pwm
EK-D5 Vario X-RES
2m PrimoChill PrimoFlex™ Advanced LRT™ 9,5 mm (3/8") / 15,9 mm (5/8")
EK Water Blocks EK-FC Titan X - Acetal+Nickel
8x XSPC G1/4" to 7/16" ID, 5/8" OD Compression Fitting.

To try and fitting it in a corsair 600t with use of dremil, but soon sussed I need a new case :o
Now I am thinking a new case and a cpu block aswell as was just going to do a loop for titan and cpu later.

Any help for a noob in over his head, would be must welcome.

Today must be help a noob day ;)
 
Rest of rig at the moment is

x58 sabertooth mobo
xeon x5650 @4ghz
6 gb dominator ram
gigabyte titanx
super flower 1000w plat
1tb hdd
corsair 600t

Will get new cpu, motherboard and ram at a later date.
 
Thanks JP, yeh noticed the fittings when tried one on the end of the tube could not screw it on.
Going to ocuk shop tomorrow so will swap the fittings, rushed in to buying all the parts over the phone without doing my home work and now getting mad with myself.
Was planning on using Mayhems Ultra Pure H2O Watercooling Fluid 1L.
Carnt find a case I like for a 240 in top and 240 in the front, if only caselabs was sold in the uk.
 
Like the look and size of the luxe, just might struggle mounting the pump res combo.
Might just buy the Phanteks Enthoo Primo Full Tower, buts its massive in height.
 
^JP^ said:
No problem! I like 7/16" personally but up to you if you change the tube or the fittings.

I would look at using one of the Mayhems Pastel fluids (I am using them for my new build), 2 years working system life and already contains biocides, corrosion and scale inhibitors.

I imported a Caselabs case and the build quality is amazing, check the link in my signature :)
Could always make do with what you have and get one imported! :D
Click to expand...

Thanks again, not got clue with any of it really went for that tube as I read is
was better for not leeching plastersizer problems, any advice is more that welcome :)

Re case I'd have butcher the corsair 600t to bits just to get a 240 in the front
and I have no chance with a 240 in the top doh.
Been reading your build, its epic :cool:
 
^JP^ said:
Yeah Advanced LRT with Mayhems Pastel is going to be the best protection in my opinion from any plastersizer, corrosion and algal growth problems.
I have the LRT in 7/16" size, I like the larger ID and thinner walls.

I would keep your fittings and change your tube https://www.overclockers.co.uk/prod...=1530&sortby=manual_sort&subid=1775&mfrid=447

Looking at the 600T a top 240 should fit if you mount the fans on the top outside the case?
Click to expand...

Just measured the tube and its Primochill Primoflex Advanced Tubing 16/10 - Clear that I have and the fittings are XSPC G1/4" to 7/16" ID, 5/8" OD Compression Fitting
Tried putting 1 on the tube seems to tight car'nt get the threads started with a lot of force.

For coolant go for Mayhems Pastel - Pure Black Coolant 1L?

Top rad space is 30mm rad is 38mm, would have to put rad outside case & fans under it.
 
Have the tube in front of me its 16/11 and fittings say 7/16" id, 5/8" od
still will not fit, I must be a wuss :o
might go for the ghetto look :D
 
^JP^ said:
If you are going into the OcUK shop anyway for other bits I would get them to check the tube and fittings just to be sure.
They are never "easy" to fit but if you do have the wrong size, a mm can make all the difference when trying to screw the compression over it!

Let us know how you get on :)
Click to expand...

Thanks will do.
What make of titans you got JP? evga sc? you will love them lots:)
 
MrMD said:
Dip the ends of the tubing in some warm water and then try and get it over the barbs.Should fit fine after that,i have the same tubing.When its cold its quite hard to get it on off the 16/11mm fittings. :)

Very nice tubing tho,so bendy without kinking!
Click to expand...

Yeh its nearly bent double before kinking, ill it now in warm water cheers.
 
Busy day today, drove 200 miles round tip to ocuk shop
New case and more parts.
Managed to do blocks and loop, much easier with bits power fittings :)
Loop filled and leak testing at the mo, so far so good.
Thanks folks for helping out.
 
Just a couple of pictures of the build

HEMGFyZ.jpg.png


DWy1GuH.jpg.png


A bit rough ready, but works ok.

Highest gpu temp so far is 48 looping on heaven.
Loving how little noise there is :D
 
MrMD said:
^^All you need in some 90 Degree fittings m8,it would work :D



Looks good,glad you got all working

Did you buy all Bitspower Compression fittings then?How are they?
Click to expand...

Thanks,
Yeh bought 9 bitspower fittings they tightened up like a dream and used 4
of the xspc fittings got them to work by warming the tube in boiling water lol

Sticking to Bitspower fittings from now on.
 
^JP^ said:
Great work there!

That black fluid really does look like Oil, I thought you had black tube for a second!

Also looks like you managed to get the compression fittings done all the way up :eek: I never get that far due to my skin coming off my fingers! Good job :D
Click to expand...

The black does look like oil:)
Did not really have a colour scheme, so thought black goes with anything.

Them compression fittings are rough on the fingers, have strong fingers with being a joiner and climb a fair bit.

should have bought the same rads as yours, but did not I was getting the Enthoo Primo :rolleyes:
 
You must log in or register to reply here.
Back
Top Bottom