Flint 2 - Discussion Thread

superleeds27

superleeds27

superleeds27

Associate
Joined
28 Nov 2011
Posts
1,865
Thought I'd make a topic for the Flint 2, as it seems to be getting a fair bit of attention.

It beats my Asus AX86S for signal and coverage.

Issues
The only issue I have with it at the minute is that Speeds will randomly just grind to a halt. This tends to happen if I've left the house and then returned, it auto reconnects, but the speeds can be as low as 10mbps? - Apparently there's a fix in the works, so hopefully, that cures that.

Anyone else had any experiences, tips, tweaks etc to share?
 
Rainmaker said:
Stock *is* OpenWRT with a super duper sexy must buy skin on top. ;) The GL.iNet releases will track behind official OpenWRT, so keep an eye out on their firmware releases.
Click to expand...
Yeah I get that. I meant that I'm not using the *proper* Vanilla OpenWRT versions.

What version you running on yours?
 
Last edited:
Rainmaker said:
I don't have a Flint2, I have an x86 box. I've used OpenWRT for years when I'm not running bare OpenBSD, Linux or VyOS. I keep abreast of the dev side, and followed the Flint2 WiFi issue fairly closely because I considered buying one last year.
Click to expand...
There's a test firmware floating on their forums which seems to resolve the issues. Or so it seems at the moment!

If the kinks can get worked out, it's a really good device!
 
GregI said:
You really should be putting vanilla OpenWRT since ver 24 was released 3 days ago. It has a lot of performance improvements in the kernel for Wiif 6 hardware.
Click to expand...
What like? If you don't mind me asking?

It's something I probably will look into, it just seems like there's a bit of a learning curve.

I'm aware of the Pesa community build that's seen as 'godlike'
 
GregI said:
You get approx 110 Mbps more raw processing power on MT7986 (CPU) due to newer kernels. See wireguard table here: https://forum.openwrt.org/t/a-wireguard-comparison-db/187586

2kMbp8X.png


It actually now makes the Flint 2 (well anything with MT7986) properly capabale of Gig wireguard/SQM. Before it like sorta did it but sorta not.
Click to expand...
That's using wireguard though? Something I'm not using.
 
Hades said:
I have a Flint 2 sitting in a box I keep meaning to install. At the moment I'm using it's baby brother travel router the GL.iNet AX1800 (Slate AX) as a temporary main router and have been very impressed with it. It's what made me buy the Flint 2 when a discount came up. I don't use the onboard WiFi as I have a separate mesh system through the house. My GL.iNet journey started with a tiny Mango travel router and then expanded to a couple of AX1800's. They seem really great devices at a great price.
Click to expand...

Yeah they seem to be. When you compare the specs to that of ASUS, you'd be looking at the AX88U Pro, at £245.

I know there's a few 'iffy' bits but they've been ironed out, or are in the process. Plus the added benefit of OpenWRT (Which I need to learn about!)
 
Well.

Mines going back. For no reason whatsoever it started giving me WiFi issues today. Connected with no Internet, or slow speeds - I'm talking less than 10Mbps.

Factory reset it, tried various firmware's, still nothing.

Would love to keep the device but the 'Iffy' bits and reliabilty of FW just means I can't trust it.

Back to the Asus!
 
John24 said:
Are you still on stock firmware? It's based of an ancient OpenWRT and isn't fully open source. Who knows what they are doing under there or if they have even bothered back porting any security fixes. Slap native OpenWRT on it and report any issues on the OpenWRT forum, that's the best way to get stuff resolved and help the project improve. I'm on 23.05.5 and don't have any Wifi issues. Going to switch to the newly released v24 when it's been out a while.
Click to expand...
I've just called it a day and it's going back to Amazon.

In reality i'd love to dig into OpenWRT and figure out how to use, best setups etc (Pesa's builds!), but at the same time I just need stability and reliability from the get go and it's not giving me that.

The coverage/signal is incredible, to have that and not need an extender/Access Point elsewhere was great.
 
Spudgun said:
I've got it set at 160. I've just backed up my PESA settings and gone back to 'stock' 4.7 and re-run all of the tests again - can't see a single difference on any device anywhere in the house and every test is within 1-2%, so margin of error.
Click to expand...
On stock 4.7, leave your house and go out of WiFi range and then return and see what happens.

Some of the devices we have would reconnect automatically but with really poor throughput.
 
Spudgun said:
Just tested this - walked to the end of the road and back - only thing I noticed was that it connected to 2.4ghz first (I have the 2.4 and 5ghz set up with different names) as my phone saw that network first as I was walking back - but speeds on that network are just the same now as they were before I left
Click to expand...
Yeah it's the 5ghz that's the issue
 
You must log in or register to reply here.
Back
Top Bottom