Fluid capacity estimate?

[ubersonic]

Going to be draining and making some changes to my system soon and I am considering giving specialist fluid a try, the cost has always been a big nono for me but figure it may be worth it once, can anyone with a head for this stuff guesstimate the amount I would need to fill my loop?

FrozenQ liquid fusion dual bay reservoir
Thermochill PA120.3
Thermochill PA160.1
Four water blocks (CPU/GPU/chipset/VRM)
And ~2m of 1/2" ID hose

Thanks

 

[Avenged7Fold]

Might get away with one litre but i would get two just in case.

 

[Uncle Petey]

Couldn't say for certain, but if it helps, I used about 1.5 litres on cpu/gpu + 360/240 monsta rads with around a metre of 7/16 tubing and a 150mm res.

 

[stuie]

I used about a 1 3/4 liters with 60mm 280 and 420 rads 2 gpus a cpu and 1/2inch tubing id get 2 liters just to be safe one spillage or leak and youl be sort with just 1

 

[JonJ678]

One litre in the circuit. one litre in the reservoir. Roughly - dual optical bays look about the same size as a litre, but I haven't measured it.

You could drain your current water into a bucket and measure the volume, before buying new fluid.