GA-P67A-UD7-B3 error help

soultaker · 30 Mar 2011 at 21:42

HI,received replacement board today and built new build, 2600k, 4 gig g-skill 2133 ram, 2 x hd 5770s, 1000w energmax psu, ocz vertex2 80g ssd. windows 7 64bit, the problem is when i power up it runs for 10 sec then switches off i get a C1 ERROR code on the board,then it restarts itsself and repeats the same process. The ACPI leds is S4, both MD and GD led show both green and yellow and the CPU led all show, having read the manual its seem to be overloading or overvolting, i have tried removing hardware one at a time and reseating cpu but still the same error, the psu up until today ran the sig below, any help will be appreciated.

RJC · 30 Mar 2011 at 22:26

Double check the memory is in the correct slots, usually 2nd and 4th from the CPU socket.

Try a CMOS reset if you have nippy done so already.

Must the PSU is slight overkill! :eek:

soultaker · 30 Mar 2011 at 22:31

tried swaping memory slots and cmos reset same thing starts up switches off. psu was brought when i had 2 x 3870x2 lol

1Day · 1 Apr 2011 at 10:31

Here is what you need to do.

Remove all but one stick of ram. Then boot into BIOS, (it will boot now) set your stuff up. Reboot all the way into OS.

Once you have done that. Then power down and put your other sticks back.