Hard drives wont appear together

gsidecturbo

gsidecturbo

gsidecturbo

Associate
Joined
13 Oct 2004
Posts
54
Location
newcastle
Hi there

Currently been running a 74gb raptor and a maxtor 10. Bought another maxtor 10 today. Just want to run it alongside not raid or anything.

I have a asus a8v board it has 4 sata ports on it (raptor and first maxtor is on bottom two ports) but if i click it into the other ports it wont recgonise it but if i unplug my other one a put it in the port that used to be on it works. Any ideas

thank you
 
think i have found the problem?? need a driver installed but i dont understand how to do it.


1. From the System Console type "NWCONFIG".
2. Choose "Driver Options".

3. Choose "Configure disk and storage device drivers".

4. Choose "Select a driver".

5. Press the INSERT key on your keyboard.

6. Insert the FastTrak Driver Disk into your A: floppy drive.

7. Press F3 and type "A:\" in the "Specify a directory path:" window.
Press ENTER.

8. The FTS150.HAM driver should be listed in the "Select a driver to
install:" window. Press ENTER to select this driver.

9. Choose "Yes" when asked if you want to copy this driver.

dont understand step 1. where do i type that?

please help
 
Right,

there are four sata ports on my board (2 red and 2 black) at the moment i have my raptor in sata raid1, 1d10 in sata raid 2 and the other in sata 1. All 3 hard drives are in my bios i have selected my raptor as my boot drive. It only shows one hard drive in MY COMPUTER though. It is not visable in diskmanagement either.
 
You must log in or register to reply here.
Back
Top Bottom