• Notice regarding image hosts and attachments. See here.

hardware for IP CCTV server

Associate
Joined
11 Jan 2012
Posts
3
Im looking to build a CCTV server system soon (have experiance in building desktops for everyday use)
well actually 2 identaical servers for redundancy that will be located in separate buildings

But im not totally sure where to start.

the specs that are important to me are not really the ones i pay that much attention too.

Basically the main data stream will be acquiring live data from several IP cameras. detecting if there is movement and if so writing the video stream to disk.
so Im guessing that bus speeds and throughput are very important here as are hard drives with large cache sizes. (most of the cameras will be recording non stop during the day but less so at night)

the system will need to be on 2 seperate LANs so will need dual network ports. the first will be dedicated for the IP cameras the second will be the normal organisation network. (the machines will be headless rackmount units with all cctv viewing done remotely from any other computer on the site)


Would I atcually need any decent graphics capability for this? the servers wont actually be rendering anything themselves being totally headless but they will be processing video streams all the time.


can anyone point me in the right direction for what sort of hardware i should be looking at for this?
 
I wouldn't have thought so. It's like my server that runs TVersity, it doesn't have a graphics card. It just uses the CPU mainly for encoding.
 
It is esentially a DVR but one thats a bit more scalable and runs with IP based cameras rather than the normal coaxial ones (as the distance between some cameras and the server location will be in the region of 8 miles, easy with fibre, impossible with coax)
 
Back
Top Bottom