Hi guys hopefully you had a good christmas 
Yesterday I took delivery of a Xfx HD5870 to crossfire with my Sapphire HD5870 (many thanks Overclockers btw for getting it to me on Boxing day).
I installed the card in my second pci- express slot & enabled it to 16x in my bios.
Windows 7 found the card & installed the drivers (I am using the 91.12 hotfix drivers).
Rebooted the pc & the crossfire setup screen appeared on my desktop which I then clicked & ok'ed.
Then the fun started all I got was a light blue screen & the pc locked up totally.
I called tech support who were very helpful & suggested I try the Xfx on its own to make sure the card was working ok & not faulty.
No problems at all with the Xfx in the machine on its own in the primary Pci slot, I put the Sapphire back as the secondary card & I get the same problem happening.
So I called Tech Support again & the guy I spoke to suggested that my power supply may not be giving out enough power (its a Hiper 880 watt Sli certified) so I decided that next week I order a bigger power supply 1000 watt.
Last night i thought lets give this one more try & see what happens.
I took all 4 hdd's out of my pc & added a single hdd back which had another version of Windows 7 64 installed on it.
Installed the 9.12 hotfix drivers rebooted & yes both cards were working as they should and no light blue screen & lockup
I then added back 3 hdd's to see if it was a psu problem rebooted and it was all working ok so power was not the issue.
I put my original Windows 7 64 boot hdd back in the pc started it up & the lockup starts again
So I then went through the process of stopping stuff running at boot/startup.
The culprit was Everest when it checks the sensors on the crossfire setup it locks the whole system, which is odd because on a single card it works fine.
Anyway its all working as it should & I have saved myself a few quid as the psu is not the problem.
Thought I would share this with you all just incase someone else gets the same problem as myself .
Have a good new year guys
Cheers

Yesterday I took delivery of a Xfx HD5870 to crossfire with my Sapphire HD5870 (many thanks Overclockers btw for getting it to me on Boxing day).
I installed the card in my second pci- express slot & enabled it to 16x in my bios.
Windows 7 found the card & installed the drivers (I am using the 91.12 hotfix drivers).
Rebooted the pc & the crossfire setup screen appeared on my desktop which I then clicked & ok'ed.
Then the fun started all I got was a light blue screen & the pc locked up totally.
I called tech support who were very helpful & suggested I try the Xfx on its own to make sure the card was working ok & not faulty.
No problems at all with the Xfx in the machine on its own in the primary Pci slot, I put the Sapphire back as the secondary card & I get the same problem happening.
So I called Tech Support again & the guy I spoke to suggested that my power supply may not be giving out enough power (its a Hiper 880 watt Sli certified) so I decided that next week I order a bigger power supply 1000 watt.
Last night i thought lets give this one more try & see what happens.
I took all 4 hdd's out of my pc & added a single hdd back which had another version of Windows 7 64 installed on it.
Installed the 9.12 hotfix drivers rebooted & yes both cards were working as they should and no light blue screen & lockup

I then added back 3 hdd's to see if it was a psu problem rebooted and it was all working ok so power was not the issue.
I put my original Windows 7 64 boot hdd back in the pc started it up & the lockup starts again

So I then went through the process of stopping stuff running at boot/startup.
The culprit was Everest when it checks the sensors on the crossfire setup it locks the whole system, which is odd because on a single card it works fine.
Anyway its all working as it should & I have saved myself a few quid as the psu is not the problem.
Thought I would share this with you all just incase someone else gets the same problem as myself .
Have a good new year guys

Cheers
lol