help? 7850 just arrived

[ColdAsIce]

try with the exe,i cant remember off hand it will only flash one of them

as for qflash you cant use it as it wont support bios's larger than 1mb,this is down to including 3tb support,once youve updated through @bios you can go back to using qflash as it will be updated

Sorry Wazza is correct. The bios update is larger than 1mb so you will need to use @BIOS to do the update. GL

 

[Ragex]

Thanks guys, just upgraded to F8A.

 

[wazza300]

is gpu anybetter? tried hdmi again? remember to use overscan in ccc display options to get rid of any black borders on your monitoer,esp if its 1920x1080

 

[Ragex]

is gpu anybetter? tried hdmi again? remember to use overscan in ccc display options to get rid of any black borders on your monitoer,esp if its 1920x1080

Not tried much just yet since I've been doing a bit of cable management using some IKEA stuff and just put in my soundcard. Gonna give Bf3 a bash in a minute if the swelling on my face goes down

 

[Ragex]

Still crashing. Exactly the same as last time, maybe I should be looking at a fresh install of Windows, it's due time I clean this machine up.

 

[wazza300]

what qpi/vtt voltage are you using? and what dram voltage? could be unstable pc? i get no crashes with my 7850

 

[Ragex]

These crashes have been happening prior to me getting the 7850, I got the 7850 for the purpose of correcting these crashes, they've just been occuring more often when I installed the 7850. I have absolutely no idea what QPI/VTT voltage is or DRAM Voltage, but tell me how I can find out and I'll get on it

 

[wazza300]

its in the bios under m.i.t

look for qpi/vtt and manually set the voltage to 1.35v

then look for dram voltage(this is for your memory) set it to either 1.5v or 1.66v you need to read on the ram box or on the stick itself to see what voltage its rated at

if its crashing its probably not enough qpi or dram voltage