• Competitor rules

    Please remember that any mention of competitors, hinting at competitors or offering to provide details of competitors will result in an account suspension. The full rules can be found under the 'Terms and Rules' link in the bottom right corner of your screen. Just don't mention competitors in any way, shape or form and you'll be OK.

Help is this post cycle normal 5900x

Shabbo

Shabbo

Shabbo

Associate
Joined
26 Dec 2022
Posts
22
Location
Croatia
So when i start up my pc from being shot down i get this really long q code cycle, but when i restart it it just skips it
so here is link to video i just wanna know if its normal or not i dont want to promote or something (i dont know if its bannable)
just to know its 5900x on ch6 with 8501 bios

- YouTube

Enjoy the videos and music that you love, upload original content and share it all with friends, family and the world on YouTube.
www.youtube.com www.youtube.com

another thing i would like to mention is than in bios i have around 62c but when i get in windows my vents ramp up and then it drops to 30-40
i would also like to know if that is normal to
(im running pbo all cores offset -20 with xmp ram 3000mhz)

thank you guys in advance :)
 
when i went from 2 stick of ram to 4 my system did the same thing ever time i booted. when i pulled 2 sticks back to normal...
it was like ever time it booted is was trying to retrain the ram timings

even thought your chip will like 4 sticks your board and chip combo may not. if if it works with your old CPU dont mean it will work with the new one.

Step one is always reset bios... and boot at default if it works there is your problem an overclock of some sort

But... Try pulling 2 stick of ram out.
 
when did this actually start happening ? or is it a new build ? its likely it doesnt like all 4 sticks did you buy the sticks all at once because if you bought 2 sticks later even if they have the same model they can still use different chips , I would first put everything at stock, turn PBO off, dont run with XMP on ram another test take 2 sticks out if it runs than try with XMP

I had problem first I had 2 sticks , later on I bought another pair same model but it would crash and when I checked with program Thaiphoon Burner both sticks used different die chips even though they both exactly called the same model they only ran without XMP I ended up selling them and just getting new set
 
Last edited:
so is that problem then? i reseted bios even updated it to latest version, and its same.
only after after instaling ai suite 3 i got new code in cycle its code 42

but pc boots and runs fine?

will this demage my pc in long run or is it only boot thing?
 
yeah i dont remember having this problem before changing cpu or actually upgrading bios for new cpu,
when u said it i think its worth to metion it to u my ram is balistix elite 4 x 4gb 3000mhz
 
When I went from 2 to 4 ram sticks on my msi board it basically got stuck when booting (before bios option), rebooted a few times and it seemed to fix itself but iirc it also reset my bios.

So my suggest is Clear CMOS, let it boot to windows to see if it's working, if it is then go into bios and set the ram to xmp, save and load into windows. If that's fine then reinput all your other settings... if you start getting warnings at any point you've found your culprit and you'll need to do some adjustments (reduce pbo ofset for example)

Having said that if it's code 42, which appears to be ram related, you might need to try each stick and slot to see if anythings faulty..

What board is it, it might not support 4 sticks at 3000mhz (most should iirc)
 
its crosshair hero vi x370 with r5900x and rx6700xt and sesonic 750gold focus smoething
if i remember before month ago there was 1800x in this board for 5 years with that ram and i dont recall seeing those cycles on q code, so i think it worked fine
when i put in 5900x i started noticing it
i updated bios reseted it do deffoults cleared coms via back mbo button

so as i mention it boots in windows every time and i see no problems with it running i get cb multicoere 21000 and single core 1600 i think with max temp 70 with front panel and 64 i think when i rip of front panel,
i dont get any crashes when im in windows only some wierd fan noise like its blowing into something it goes like huuuuuu sometimes xd

so my question is do i need to be scared of those cods if it boots fine or its big problem?

i got thos ram sticks before 5 years i went for 5900x couse i tought i can only change cpu and gpu and not build whole new platform
 
also i run y cruncher for half of hour 3 cycles stress test and it passed all tests with max temp around 80, on idile temp is around 40 with front panel and 33 without it
 
if i decide to buy new ram i dont know witch to buy couse on crosshair vi support page i cant find witch rams are supported with 5000 series
 
Shabbo said:
if i decide to buy new ram i dont know witch to buy couse on crosshair vi support page i cant find witch rams are supported with 5000 series
Click to expand...

cycling through codes is normal , once in windows mine just displays the CPU temp MSI board

the QVL list listed should be also for 5000 series
 
yea bios is updated to latest version 8601 and as i mention everything runs fine only thing is that when i cold boot it cycles 2 times on qcode display and when i reset pc it cycles only 1 time and fast, so when i cold boot it blinks all leds ddr cpu and that, i need to mention when it blinks cpu light its red im not sure is it deafult color or it is error code and q code displays numbers like 15 16 17 then goes sometning like 42 with cpu red light on thnen something like c8 after that a2 aa and its in windows when its on aa witch is normal code for asus mbos and it stays on aa in windows i would think that if its real error my qcode would stay on number where error is it wodnt get in windows or am i looking at it wrong way?
 
my memory of filly registrated in bios i can se i have 4 dimms 16gb and in apps like cpu z i can se they run normally full speed ass set, and i dont get crashes, only thing that was wierd to me is when i had sleep enabled when my pc went to sleep mod it would take it like 30 seconds to boot again and once i heard mbo squeq 4 short beeps so i disabled sleep mode, i was searching on reddit and saw people have same bug even with new mbos like x570 and flagship ones, they say its some windows error
 
Shabbo said:
my memory of filly registrated in bios i can se i have 4 dimms 16gb and in apps like cpu z i can se they run normally full speed ass set, and i dont get crashes, only thing that was wierd to me is when i had sleep enabled when my pc went to sleep mod it would take it like 30 seconds to boot again and once i heard mbo squeq 4 short beeps so i disabled sleep mode, i was searching on reddit and saw people have same bug even with new mbos like x570 and flagship ones, they say its some windows error
Click to expand...

have you pulled 2 ram stick yet?
 
i also mentioned its not my ram light lit up when i se 42, but my cpu light is red for second with code 42 and then it continues boot cycle
 
You must log in or register to reply here.
Back
Top Bottom