• Notice regarding image hosts and attachments. See here.

Help me please...something is overheating! :(

Associate
Joined
9 Jun 2008
Posts
349
Everything is at stock speeds, as I have not attempted to overclock my computer till I get my new graphics card.

Ok basically I know its overheating because one; when I am playing games about 10 minutes in I get artifacts, a few minutes later the whole screen is a rave show...this is in all the games I've tested...number two...when I have all my fans turned up to max...it doesn't do it.

My specs are as follows;

Hiper Osiris Case
3 X Noctua Vortex control fans
Zalman fan controller
AMD Phenom II 550 Dual Core
Thermalright extreme HS with 2 X Enermax magma fans
MSI 790FX-GD70
Corsair Dominator 2X2GB 1600Mhz/9-9-9-24 running stock
Corsair 750W PSU
BFG OC2 8800GTX @ stock
Creative fatality pro
1TB caviar black HDD

So its annoying me, my initial impression was the graphics card...even though it never did it on my old rig (upgraded everything but that), now my old case had way worse cooling (didn't have an intake or outtake fan)...but I can't rule it out so I took the cooler off it today, cleaned all the dust and even give the GPU a fresh layer of arctic silver 5 (which btw reduced its core temps by 10oC)

I am still under the impression (since there's no hint of data corruption, random crashes or BSOD's) out of a game that it still could be the graphics card however the ram chips on there.

Could it be the normal ram? It still got artifacts and then disco'd did it when I turned the ram to 1333Mhz with slightly lower volts (the JEDEC settings or whatever its called)...

I've run temp programs, my CPU runs 42 load when all the fans are on low, my motherboard around 35, the graphics card now runs 82 highest on load (previously 93 after comparing it since I cleaned and added new thermal paste).

It's only doing this now on a hot day see, and its never done it before...so I am rather dissapointed since its all new hardware and I spent quite a lot on the cooling and spent some time choosing a case with good circulation.

How can I diagnose the culprit? Thank you for your help!
 
Does sound like the graphics card is the culprit. When you say you turn all the fans to max and the problem stops, does that include the gfx card fan? If so just try the GFX card fan on max and all other fans on normal and see if fixes the problem, if so you know its the GFX card that's at fault.
Have you also tried updating the drivers? Another possibility is that your card could be dying which would explain the artifacts.
 
Does sound like the graphics card is the culprit. When you say you turn all the fans to max and the problem stops, does that include the gfx card fan? If so just try the GFX card fan on max and all other fans on normal and see if fixes the problem, if so you know its the GFX card that's at fault.
Have you also tried updating the drivers? Another possibility is that your card could be dying which would explain the artifacts.

Its basically a fresh XP install, literally a week old, and everythings up to date. All the fans but the GFX card are controlled manually by my zalman controller.

My cousin has been playing on it now for an hour, the GFX fan is running full wack and the only fan I've turn up (everything else is running low speed) is the main frontal intake and its running fine.

Considering I am selling this card to him when I get my new one, don't wanna give him dodgy card :(
 
artifacts doesn't necessarily mean something is overheating, could be faulty memory on the gfx card, if its possible try any other PCI-E card and see if you still have problems.

however artifacts are 8 times out of 10 due to a bad gfx card.
 
artifacts doesn't necessarily mean something is overheating, could be faulty memory on the gfx card

That is true, and I believe that depending on the type of artifacting (geometric shapes, random colors, tearing, etc...) we might be able to determine what exactly on the GC has failed - be it video memory or the GPU itself. Can you provide a bit more detail on that for me?

Also is there any chance of trying this 8800 in another machine? If the problem follows the card it definitely needs to be replaced, which I would be happy to do for you.
 
In as much detail as I can early on a Sunday morning :P

Team Fortress 2 - It starts off with some textures flashing, and random white squares flashing. The all of a sudden it just goes, the textures just go all kinds of crazy...for instance the Pyro's flames just because squares. All the user interface breaks up, for instance words break into pieces. The water becomes black. What I will do it play TF2 this morning, then when it happens I will take a picture with a digital camera.

I will see if anyone can try it in another machine for me, but that is looking fairly bleak tbh.

Which RAM? The graphics card has stock cooling, but I've had it for a while now and its never done that. Infact I was still at college when I got it, so its over a year, its never done anything like this. As for my normal ram, theres no active cooling for that, however from my previous experience with faulty system ram that overheated I got BSODs, data corruption and random freezes. When I exit the game when it goes into a russian rave party, everything is fine.
 
Yeah I was meaning the ram chips on the card. Where in the case is the card situated, it could be in a warm air pocket depending on how your fans are set up. Tried it with the side of the case off?
 
The ram chips are situated around the GPU from research, and my GPU core is cooler than it was in my last case. My cousin has been playing TF2 for an hour now with fans low and its OK so...I really have no idea! :S

I will try it with the side panel off but off out today!
 
Last edited:
That is true, and I believe that depending on the type of artifacting (geometric shapes, random colors, tearing, etc...) we might be able to determine what exactly on the GC has failed - be it video memory or the GPU itself. Can you provide a bit more detail on that for me?

Also is there any chance of trying this 8800 in another machine? If the problem follows the card it definitely needs to be replaced, which I would be happy to do for you.

I have just tested it on my uncle's computer and it is going the same. I think I need to RMA it. :(
 
Yeah. Lucky its a BFG. My money's on the memory on the card failing, though Jeff's diagnosis will be a safer bet if he posts one
 
Back
Top Bottom