Help New build won't boot

ginger_pat · 12 Jul 2007 at 18:14

I ordered my parts for my new build and they arrived i have a :

Case+Psu- Casecom KG-868,350w
Motherboard- ASRock 4CoreDual-VSTA PT880
CPU- Pentium 4 2.8ghz Lga 775
Ram- 1Gb (2x512) corsair DDR
Hdd- Maxtor 120gb

It has power for a milli-second the cpu fan spins, the led lights built in to the case flash and rear fan on case also spins but then all stop, then when press power button nothing happens.
I believe the problem may be with the jumpers as they are not well labeled and no instructions came with the case.Any help would be grately appreciated. I can supply photos if this helps.

ginger_pat · 13 Jul 2007 at 11:04

Any help would be grately appreciated

ginger_pat · 13 Jul 2007 at 11:51

ty so much

i will try it now

ginger_pat · 13 Jul 2007 at 12:10

Didnt work i got no power at all but ty anyway

ginger_pat · 13 Jul 2007 at 13:29

oh rite ty i will do all that now

ginger_pat · 13 Jul 2007 at 14:48

Do will it not work as the psu has a 20pin n the mobo has an 20 pin ATX?

ginger_pat · 14 Jul 2007 at 10:38

Ok i took out everything and took out my motherboard there were no screws under it but one screw had been screwed in very tight and the motherboard was touching the case so i put it all back carefully and i connected the 20 pin connecter the 4 pin connecter and the fans. I put the power button jumper in to the right socket and still nothing. (I double checked everything)So I have come to the conclusion that it is my PSU so now i need a powerfull PSU and only £25 so will I need to save up more ore will one at £25 be ok?Thanks again Pat

ginger_pat · 14 Jul 2007 at 13:05

I have not put them on posts like fobose said i will put them on now and tel you how it goes. Thanks again pat

ginger_pat · 14 Jul 2007 at 16:56

I put the posts on and power didnt work so i swapped my power cord and it boots up

but know monitor seys no signal

But thanks for evey one that has helped much appreciated.Pat

ginger_pat · 14 Jul 2007 at 20:12

Yes the 4pin atx connector is in. I have an Nvidia geforce 7600 GT

ginger_pat · 15 Jul 2007 at 14:56

So are you saying that my monitor says no signal because my motherboard is broke? I have tried 2 different monitors and put the monitor cable through my gfx card as my motherboard monitor port doesnt fit with that cable. Thanks. Pat

ginger_pat · 15 Jul 2007 at 15:20

Ok thank you