help on overclocking

Associate
Joined
10 Jun 2007
Posts
50
hi everyone i just bought this system 20days ago and finally after all the hassles i hav got it set up and ready for overclocking..

the system is

crd 1.80ghz ( stock cooling )
2gb gskill 800mhz
asus p5k motherboard
nvidia geforce 8800 gts 320mb
550w ocuk huntkey power supply
nzxt apollo gaming case

i am new to this overclocking and hence need a lot of advice i have a stock cooler on the cpu and 3 fans in my case two for intaking air and one to take out the air. if anyone has a asus p5k board then plz help me out with overclocking and also the right optimisom i need.
thanks in advance
 
hi i tried this rivatuner and did what you said. but when i say enable drive level overclocking it tells me to reboot detect or cancel
when i detect it says itscore clock 770mhz and memory clock 1160mhz
it wont let me go more than that.
 
hi mansize tissue i did what you told me and seems to be working my max multiplier is 9 and my systems is seeming fine.
details now

core speed 2070,8mhz
bus speed 230mhz
rated fsb 920mhz

voltage 1.272v ( i set it at 1.3 instead of 1.4 )

memory

frequwncy is 286mhz ( b4 when i used this *** thing it was 368 )
fss;dram 4:5
cas latency 5
ras to cas 5

ras precharge 5

cycle time 18

can i do any better than this.
 
hi just posted 2270mhz
bus speed 246mhz
rated fsb 980mhz
voltage 1.304v

my temps according to the bios says

46 degrees b4 it was 34 degrees
what is the max temperature i can run a cpu
 
Back
Top Bottom