Help - Various blue screen errors

LupoLover

LupoLover

LupoLover

Associate
Joined
15 Jul 2008
Posts
1,225
Ive just swapped Mobo and CPU out from Intel to a Ryzen setup.

Installed a fresh copy of windows 10 onto SSD and just installing drivers for about an hour and then a blue screen.
LOADS of messing around, but Im down to the SSD, 1 memory stick and GFX and still getting various blue screen messages just booting from USB to try and install Windows and its not having it. Messages are :

PAGE_FAULT_IN_NONPAGED_AREA
IRQL_NOT_LESS_OR_EQUAL

Recovery - 0xc0000221

Ive tried each one of my memory modules encase 1 is duff but always get smae sort of messages. I cant even install windows but can sit in BIOS for 20 min fine.

Ive done a CMOS clear also
 
Wonder if the ssd could be causing problems (think both those errors could be the result of corrupted files on a failing drive) - is it new or have you used it in the past? If you have any spare drives could you try installing Windows on one of those just to see if you get the same problem?
 
Just put ssd in my 6600k machine with memory and running windows memory diagnostics and so far so good.

Ssd is a samsung 840 pro.
Memory is hyper furry 4x4gb kit but think it's only 2666mhz
3600 cpu
B550 tomahawk.
1080 gtx

Thanks guys
 
Not sure windows memory diagnostic
Is as good as memtest
The ram worked previously? It's not new?
Bit strange it ran so long before the first blue screens
You checked CPU temperature?
In the bios if can't boot windows though it will be lower
In the bios as CPU isn't doing anything
 
Windows mem test passed fine and I'm back using old system fine. Could cpu or mobo be bust...... not convinced as they did work and still sit in bios fine.

Memory too slow?
 
Not sure memory too slow would be an issue
CPU temperature?
Did you set xmp on ram?
Or just leave it where the bios put it?
As greatauk said if got a spare drive try that
As 840 pretty old though still got an 830 and 840 myself lol
And they're going strong

Could also try
Remake your windows install usb
Try a different usb to make it if got another
Or take the drive out the Intel machine
And try to boot of that
Usually nowadays it will boot ok going from Intel to amd
Not like years ago when trying that would
Guarantee blue screen
 
Last edited by a moderator:
So use memory and ssd in my 6600k system and fine. Back into ryzen and its showing

DRIVER IRQL NOT LESS OR EQUAL.

I've left everything default in bios.
Used RAM for years fine and just put back in intel and fine.....
Cpu temp in bios fine, sub 40c. D15 cooler
 
As jigger said is the ram on the qvl list
Though even if it isn't
Just means they don't test every single possible ram
If it is on the list though then it should work
Could just be it doesn't like that ram
Though not had any problems using different models of ram
Myself with 3xxx ryzens
 
It's a b550 tomahawk bios is june 2020 so not latest but it's a b550. I got no mates near me with computers.i think I will buy a 3000mhz 2x8gb kit.

Yes I tried 1 module and still same. All 4 work fine in my 6600k system.
 
.does your bios have a boot training/ram training option?
Not something I have ever used
But vaguely recall reading about it somewhere
Or manually lower the timings /play with voltage
There's also a gear down mode but never used that either

I have 32gb of ryzen tested ram for sale in MM
Or if you're near me
You can borrow it for testing
 
You must log in or register to reply here.
Back
Top Bottom