• Notice regarding image hosts and attachments. See here.

Help! What's causing this problem ?

Associate
Joined
7 Oct 2009
Posts
500
I'm hoping that all you guys on Overclockers can help me out with a problem that has been happening for sometime (about a year!). The problem used to occur when I would log on to my computer on start-up. When I did this, occasionally the system would freeze on boot-up and blue circle of the loading hard drive would appear on the screen. Sometimes the system would hang for 15 minutes plus and got progressively worse as time went on.

When I thought I could take no more of this I switched from Mozilla Firefox to Chrome and the problem solved itself. However I am currently using a desktop management software system called PaperPort. Occasionally when scanning large documents into the computer the program freeze its and a message appears saying there is not enough memory and the system freezes. If I then restart the system the system will freeze on start up and once again the blue Circle will appear. Again it can 10 minutes or so before the system manages to load.

I'm wondering if there is a problem with my SSD card and yesterday called Intel about this. They suggested a firmware upgrade (the firmware is current and up to date), running TRIM (which I do regularly) and re-formatting the SSD. I spoke to Overclockers yesterday and they recommended the crucial 120 GB SSD for £139. I'm tempted to get this and see if this solves the problem. What do people think, is it my SSD or is it perhaps something like my motherboard which originally I thought was the problem?

Any help most appreciated as I'm thinking of ordering a new SSD today
Cheers :)
 
Last edited:
Wow, I'm surprised no-one has replied to my post - normally get some great advice on here. Is there anyone who might be able to give me some tips on this - please!
cheers
 
Have you tried a fresh windows install? Did you install windows fresh when you got your SSD? Did you install with AHCI mode enabled? Also, which SATA port are you running the SSD on? Make sure it is the primary SATA port and not one of the additional marvell ones.
 
Last edited:
Have you tried a fresh windows install? Did you install windows fresh when you got your SSD? Did you install with AHCI mode enabled? Also, which SATA port are you running the SSD on? Make sure it is the primary SATA port and not one of the additional marvell ones.
Cheers for the reply. I will check all of these tomorrow and report back. Did a fresh install of windows as bought at same time as windows 7
 
Back
Top Bottom