Help With Memory Tune

Ad_Augendae · 20 Jan 2025 at 16:28

I got 4 sticks of 8Pack 3200 c14.14.14.31 and need someone to take a look over the settings to see if I have done anything silly.
3200 C16 seems ok, will the below voltages etc be ok, XMP wouldn't boot as expected!

JollyJamma · 20 Jan 2025 at 21:48

Set your DOC voltage to 1.1 and try XMP again.

I’ll post a DDR4 overclocking guide that’ll give you an easy timings and voltage breakdown and get that running at full speed no problem.

You can even go in and tweak tertiary timings for a little extra speed.

Ad_Augendae · 21 Jan 2025 at 10:28

Thats better, I had 1 volt set in ryzen master. Set in bios to 1.1 from Auto!

JollyJamma · 21 Jan 2025 at 10:29

Forgot to add the guide link, see here

Ad_Augendae · 21 Jan 2025 at 10:30

Is that voltage ok long term ?

JollyJamma · 21 Jan 2025 at 10:31

Ad_Augendae said:
Is that voltage ok long term ?

Go read the OC guide.

Ad_Augendae · 21 Jan 2025 at 10:32

Will do, and thanks for the pointer!

tamzzy · 21 Jan 2025 at 23:59

The original zen and zen+ chips needed a golden sample IMC to run ram faster than 3000. Don't be surprised if you can't get the 8pack ram to run at its rated speeds.

JollyJamma · 22 Jan 2025 at 11:03

Agreed with tamzzy.

OP, also update your BIOS.

Ad_Augendae · 22 Jan 2025 at 14:53

Did so already! Thanks
This PC got retired and I'm just testing it, I updated from 42d to 53d last night after getting random fails yesterday with ram at 3200C14 1.375V 1.1 Soc
It will run 3200 XMP with the new bios but I'm not feeling the Voltage spikes and amount of voltage it brings. After another morning of testing I've settled
with the stock settings and pushed the Ram to 2666 from 2400. I've not managed to break it yet anyway!. And sadly it's going back to the cupboard it came from as a spare.
The other machine same spec is still being used, so this can replace either if they break with fresh win11 installed with TPM.2 module.

JollyJamma · 22 Jan 2025 at 15:19

I don’t think the voltage jumps are an issue though.

Part of how systems work is they increase or decrease voltages and other settings depending on the power draw.

I’d just set it to the profile and enjoy your system.