help with raid 0 i think

stevewah · 17 Dec 2012 at 16:51

hi just asking how to set up raid with my set up mb is a gigabyte p67a-ud4-b3

stevewah · 17 Dec 2012 at 16:52

ive got OCZ Agility 3 Raid Pack 2x 120GB (240GB) 2.5" SATA-3 SSDs
and want to set up the raid for speed

leigh_boy · 17 Dec 2012 at 16:55

go in to the bios, enable raid, reboot, look for raid setup e.g f8
create your raid 0 . all good to go

warning drives will be formatted.

stevewah · 17 Dec 2012 at 16:55

i have a ocz agility 2 i got just over a year ago at about the asking price of the two agility 3,s will i need to do a bios update

Mitzy · 17 Dec 2012 at 16:57

Assuming you've got your drives hooked upto the appropriate Sata ports.

Boot into bios, look for Sata controller options and set them to raid, save and reboot.

Boot into your boards raid controller (it's usually something like CTRL + R), you'll see a prompt anyway. Create your raid array by following the onscreen instructions. Save and exit.

Now install windows via the usual method, you should see one larger drive I stead of your two smaller ones.

That's basically the gist, keep a laptop handy so you can google stuff if you run into any problems.