Help

jordan26 · 2 Aug 2020 at 19:35

Hiya all am getting no signal l, all I did was put a USB stick in the 3.0 port then all of a sudden am getting no signal error any ideas. I've checked the on board gfx and getting the same. Iv3 unplugged the card and tested onboard but getting same error. Also tested on another monitor

jordan26 · 2 Aug 2020 at 20:43

Mcnumpty2323 said:
Shine a torch/your phone in the USB port
Look for bent/touching pins
If it's front USB ports disconnect them
From the motherboard and see if it works

Yes it's the front USB any idea how I disconnect them

jordan26 · 2 Aug 2020 at 21:04

I've found a video I've done that but still the same and yes the chip pins are bent

jordan26 · 2 Aug 2020 at 21:13

I can't get on to check with cpuz

jordan26 · 2 Aug 2020 at 21:36

Yes I've removed both still no picture

jordan26 · 2 Aug 2020 at 22:46

Will that remove the overclock that overclockers did.

jordan26 · 3 Aug 2020 at 19:00

Couldn't say what psu, I got a overvlocked bundled cpu was i7 6700 @4.5. 16gig ran ddr4 gfx 1060 6gb. I've had to take the pc to a local shop. When it comes back how would I check if I have a save in bios