How much stuff can i put on one loop ???

Mr. May · 7 Sep 2011 at 18:41

Jokester said:
I use a single D5 on my loop. It's got a CPU, GPU, full MB, plus 10+m of tubing and about 50 elbows in it, previously used a DDC 18W as well and either cope fine with it.

jesus

why so many elbows ?

Jokester · 7 Sep 2011 at 18:48

I've got passive radiators mounted on the side of my case.

Mr. May · 8 Sep 2011 at 12:39

arhhh any piccys ?

Jokester · 8 Sep 2011 at 17:26

Mr. May said:
arhhh any piccys ?

I'll upload some at the weekend since it looks like Uploadit.org has permanently died.

vectisitch · 9 Sep 2011 at 18:30

i've just changed from single to dual loop.i had my 2600k running at 4.6 and 2 gtx470's on a ddc 18w,360 rad,240 rad. just was'nt happy with my cpu temps and thought maybe the 2 gtx470's were heating up the water too much.so,i know have the 2 gtx470's on a loop with a 360 rad,clocked to 800/1600/1800 with 1087 volts and getting temps of 51/49 on a heaven bench,so i'm very happy with that.however,i now have the 2600k on it's own loop with a 360 rad which i thought was a bit overkill.but the temps in prime95 are hitting up to 80.i reseated the cpu block but made no difference.i'm using icediamond 24 on it too.

teknokid · 9 Sep 2011 at 22:21

Dont forget, he said he was running the gfx blocks in parralel, which will reduce restriction...

I reckon a decent pump would handle it just fine...

Jokester · 10 Sep 2011 at 16:35

Mr. May said:
arhhh any piccys ?

I've a total of 22 Cape Cora tubes, 2 groups of eleven (one on each side) with parallel flow.

teknokid · 10 Sep 2011 at 17:38

Jokester said:
I've a total of 22 Cape Cora tubes, 2 groups of eleven (one on each side) with parallel flow.

What sort of temps do you get? I reviewed the kit and it performed pretty badly...

Jokester · 10 Sep 2011 at 18:38

teknokid said:
What sort of temps do you get? I reviewed the kit and it performed pretty badly...

It had my i7 920 stable at 4.4GHz with full load temps of about 75C and currently got my i7 2600k at 4.6GHz with full load temps of about 70C. Takes a good couple of hours for it to reach thermal equlibrium at full load. That's also got the motherboard and a 580GTX on the loop as well.

Edit: Delta T is about 20C at about 250W load.