Hi,
I recently bought a Parvum S1.0 case and thought I'd go all out on a proper watercooling setup for it.
This is my first time going this far into watercooling territory so I'm hoping I can reduce the amount of mistakes I'm making.
My current list of things is:
YOUR BASKET
1 x OcUK Tech Lab - 18w DDC Pump & EK-DDC X-RES 140 CSQ Value Combo £105.98
1 x EK Water Blocks EK-Supremacy Clean CSQ - Nickel £56.99
2 x Hardware Labs Black ICE Radiator GT Stealth 240 - XFlow £36.98 (£73.96)
1 x Mayhems X1 UV Green Premixed Watercooling Fluid 1L £7.99
5 x Bitspower G1/4" Matt Black Compression Rotary Angle Fitting For ID 8MM OD 10MM Tube £7.99 (£39.95)
1 x Bitspower Black Sparkle "L" Fitting - 90 Degree Water Cooling Accessory (BP-BSLMB) £7.99
5 x Bitspower G 1/4" Matte Black 45 Degree IG 1/4" Adapter - Black Matte Finish £6.98 (£34.90)
1 x Bitspower 60 degree adapter 1/4 to F 1/4 inch - matte black £6.3
1 x Mayhems Ultra Pure H20 Watercooling Fluid 1L £4.99
10 x Bitspower G1/4" Matt Black Compression Fitting For ID 8MM OD 10MM Tube £3.98 (£39.80)
Total : £390.94 (includes shipping : £10.00).
On top of this I've bought 8mm(ID)/10mm(ID) hard acrylic tubes & a 580 GTX waterblock.
The setup in my mind goes a little like " Pump/Res -> Rad 1 -> Rad 2 -> CPU -> GPU -> Repeat
Here is a very out of proportion and quickly done drawing to visualize everything. I would upload my notes on what fittings to get but it's even worse to look at so I'll spare you.
So before I click the big order button is there anything out of place or changes people would make?
Thanks, much appreciated!
I recently bought a Parvum S1.0 case and thought I'd go all out on a proper watercooling setup for it.
This is my first time going this far into watercooling territory so I'm hoping I can reduce the amount of mistakes I'm making.
My current list of things is:
YOUR BASKET
1 x OcUK Tech Lab - 18w DDC Pump & EK-DDC X-RES 140 CSQ Value Combo £105.98
1 x EK Water Blocks EK-Supremacy Clean CSQ - Nickel £56.99
2 x Hardware Labs Black ICE Radiator GT Stealth 240 - XFlow £36.98 (£73.96)
1 x Mayhems X1 UV Green Premixed Watercooling Fluid 1L £7.99
5 x Bitspower G1/4" Matt Black Compression Rotary Angle Fitting For ID 8MM OD 10MM Tube £7.99 (£39.95)
1 x Bitspower Black Sparkle "L" Fitting - 90 Degree Water Cooling Accessory (BP-BSLMB) £7.99
5 x Bitspower G 1/4" Matte Black 45 Degree IG 1/4" Adapter - Black Matte Finish £6.98 (£34.90)
1 x Bitspower 60 degree adapter 1/4 to F 1/4 inch - matte black £6.3
1 x Mayhems Ultra Pure H20 Watercooling Fluid 1L £4.99
10 x Bitspower G1/4" Matt Black Compression Fitting For ID 8MM OD 10MM Tube £3.98 (£39.80)
Total : £390.94 (includes shipping : £10.00).
On top of this I've bought 8mm(ID)/10mm(ID) hard acrylic tubes & a 580 GTX waterblock.
The setup in my mind goes a little like " Pump/Res -> Rad 1 -> Rad 2 -> CPU -> GPU -> Repeat
Here is a very out of proportion and quickly done drawing to visualize everything. I would upload my notes on what fittings to get but it's even worse to look at so I'll spare you.
So before I click the big order button is there anything out of place or changes people would make?
Thanks, much appreciated!
