i7 950 stock temps

Associate
Joined
13 Aug 2009
Posts
370
Location
widnes
hey my average temps are between 38 and 43
and on loads its between 61 to 68

but it seem core 0 and core 2 run hotter than the other 2 by 2 or 3 Celsius and core 0 runs a few Celsius higher probably nothing just bugs me a little

is this normal for stock and cooling it with a h50 pulling air into the system

thanks
 
Probably the heat spreader on the CPU is uneven or calibration of the sensors.

I would not worry :)
 
They seem a bit high at load, with a TRUE which is about on a par with h50, i was hitting 51-46-50-47 p95 load, but of course other factors such as case airflow, ambient temp etc will all have an effect on temps.
 
Seems a little high for stock, but not too much to worry about. It didn't make a huge difference intake or exhale on mine with a H50. A few degrees variance between cores isn't much to worry about.

Edit: I would imagine the motherboard is being "generous" with voltages; which would explain in part the temps.
 
Last edited:
Is it a reference cooler or something like a vapor-x? Just saying as whilst the non standard coolers tend to be quieter and better they also dump a lot of heat into the case. The references tend to exhaust heat.

(My 920 idles at 50-55 and peaks at 75-80C, but about 10C of that is a hot 4890 dumping heat into the case)

Your cooler is working correctly as you can see the variance in temperatures between idle and load are about right, probably wouldn't hurt to reseat it as i'd expect a 20C diff at stock.
 
yeah i just reseated it today and ive done a bit of undervolting the cpu highest temps underload are now 62-56-60-55 from 68-63-65-61 and lowest are 43-37-43-37


i realy like my cpu cores all to idle in the 30s

core voltage 1.056
 
Last edited:
i reseated it now 42-36-42-36 so i might change my h50 to push and pull out of the system
and full load is 58-52-56-52

any other ways to drop all cpu cores in to 30s
 
Last edited:
Back
Top Bottom