Caporegime
No, that should be left alone.
To set a manual vcore you’ll need to change the setting you changed to offset, to override.
Then change the vcore to 1.25.
-
Competitor rules
Please remember that any mention of competitors, hinting at competitors or offering to provide details of competitors will result in an account suspension. The full rules can be found under the 'Terms and Rules' link in the bottom right corner of your screen. Just don't mention competitors in any way, shape or form and you'll be OK.
i9 12900k temps
- Thread starter Gwyn
- Start date
No, that should be left alone.
To set a manual vcore you’ll need to change the setting you changed to offset, to override.
Then change the vcore to 1.25.
Caporegime
Yeah, that’ll be it.
Awesome thanks. I will carry on playing in the morning. Thanks for all the help.
Caporegime
What's the vcore and packpage power showing as in hwinfo64 when running Cinebench at 1.25? It should not be doing that to your score.
Max vcore is 1.252
Max package power 147w
Caporegime
Something is gimping your power draw, should be still over 200w at 1.252v.
you definitely need to manage the voltage manually, the boosting algorithm may be messed up when you only put in a manual voltage, i'd try setting the CPU overclock manually as well, start at 4.9 all core, 3.9 e core to start with and see what happens with temps and performance.
Thanks. I will try that
Sorry for the stupid question but how do I set the cpu speeds?
Caporegime
It might be easier following a video for undervolting if you're new to this.
Here's an example on an ASUS motherboard, the settings you need to change should be the same or similar across the board though.
I tried that but I don’t have the adaptive setting only auto, Manuel and offset
Caporegime
What motherboard are you using?
Caporegime
That's probably why then. I believe you need a z690 board to gain full control of the voltage.
You might have to revert to the offset mode and see how far you can reduce it without losing performance. I think you said a -0.05 offet worked fine?
You might have to revert to the offset mode and see how far you can reduce it without losing performance. I think you said a -0.05 offet worked fine?
I will try that and see how it work
Soldato
Yes you can manually set voltage on these boards. Set LLC in digi vrm to 4 or 6, set current capability to 140%. When running a benchmark have core temp and cpuz open so you can check if its downclocking. So if its set at 4900hz does it remain there throughout. while you are testing and trouble shooting disable C-states in the advanced cpu tab and when in windows go to control panel type power options and select the performance tab instead of balanced tis will run everything at full so worse case scenario. you can change back after. out of curiosity what clocks are you running and at what voltage and what was your power draw??
I just set the offset to 0.07 and it’s drawing 254w and vcore is 1.305. I will do the adjustment you suggested and see