• Notice regarding image hosts and attachments. See here.

  • Competitor rules

    Please remember that any mention of competitors, hinting at competitors or offering to provide details of competitors will result in an account suspension. The full rules can be found under the 'Terms and Rules' link in the bottom right corner of your screen. Just don't mention competitors in any way, shape or form and you'll be OK.

Intels 2008/2009 road map

Soldato
Joined
12 Jun 2007
Posts
8,756
Location
Ireland
roadmap.png


me wants 2.93 bloomfield :eek:
 
Hmm, what I find most interesting about that is no dual-core Nehalems until the second half of next year! Intel obviously trying to push as many people to quad as possible. I also notice that these coincide with Lynnfield which must be the 32nm shrink of Bloomfield, so the question is whether the Havendale duals will be 32nm too, skipping the 45nm generation entirely, or whether they'll relegate the duals to the "old" 45nm tech and only use 32nm for the quads.
 
If i have got this right, they are not just going to stop making 775 processors. They are still going to release them alongside the new sockets? Yes/No? Looks like that anyway with the new E7***/E5***/E2***/E1***/4** series. At least nobody will be forced to change sockets for 12-18 months. Unless you want the high end and Nehalem of course.
 
Last edited:
If you want the new Nehalem core, you have to change motherboard and socket, end of. S775 will only support the older Conroe/Penryn processors.

Nehalem has the memory controller on-board and thus requires a great many more pins than the older processors and there's no way round that.
 
Lynnfield is a cutdown Bloomfield, its got dual channel DDR3 instead of Triple, and instead of the Quickpath interface, it uses PCI express as the CPU -> motherboard interface.

Havendale lowers specification further, but adds an integrated graphics chip.

There will be overlap between Bloomfield and Lynnfield, but Bloom's gonna have the better performance. I guess at MS3, and and P1, that a higher clocked Lynnfield may outperform a 2.66 / 2.93ghz Bloomfield.

Bloomfield/Lynnfield/Havendale are platforms, not processors(well its kinda both really, as Intel are using several sockets), so the 32nm dishrink can work equally well on all 3 platforms, assuming the appropriate motherboards support the required VRM's

Westmere is the first of the 32nm dieshrinks (for the bloomfield platform)

I wouldnt say no to a 2.66Ghz Bloomfield, it will be about half the price of the 2.93, and will probably clock just as well as the 2.93 ;)
 
Last edited:
By the way it looks, 775 won't be really be out of the market 'til early 2010. I'm surprised that there's going to be a Lynnfield released at the same price point as the higher-end 2.93GHz Bloomfield (which is the same £320+ Q9550/Q9650 price point).
 
I'm surprised that there's going to be a Lynnfield released at the same price point as the higher-end 2.93GHz Bloomfield (which is the same £320+ Q9550/Q9650 price point).

Me too, although I could concieve that a 3.6Ghz Lynnfield could give a 2.93 Bloomfield a run for its money, and may be a viable choice for a £320 processor. I wouldnt buy one though, lack of Quickpath and Tri-Channel DDR3.. No thanks.
 
At least nobody will be forced to change sockets for 12-18 months. Unless you want the high end and Nehalem of course.

Depends on what you want really, the LGA775 Quads will be phased out Q3'09 on that roadmap, but the Penryn dual's will stick around a little longer in the bargain basements.

If your into a higher spec system, then it would make more sence to change socket and go bloomfield.
 
Me too, although I could concieve that a 3.6Ghz Lynnfield could give a 2.93 Bloomfield a run for its money, and may be a viable choice for a £320 processor. I wouldnt buy one though, lack of Quickpath and Tri-Channel DDR3.. No thanks.

Well, it's not all bad because it means that low-end Havendale and Lynnfield folks have a decent upgrade path down the line. Not entirely sure what advantages Quickpath and tri-channel DDR3 would really have on a single-CPU desktop though apart from a mostly unnoticeable performance boost and the incentive to buy probably overpriced 6/12GB kits of RAM.
 
Back
Top Bottom