is it safe to use a magnetic screw driver to build a computer

lukeforrest · 15 Mar 2013 at 15:08

I read somewhere that this can damage the mother are is this true ?

Judgeneo · 15 Mar 2013 at 15:09

Fairly sure its completely fine.

lukeforrest · 15 Mar 2013 at 15:12

that's good enough for me

TwsT · 15 Mar 2013 at 15:21

WE use them here to build pc's

Baron C · 15 Mar 2013 at 16:19

If I hadn't my pc would probably have not been built...damn those m3 screws...!

Doco · 15 Mar 2013 at 16:52

I used one myself - as above would have been an extra pain if I hadnt

HecFam · 15 Mar 2013 at 16:54

I usually stick a bit of blu tack on the end of the screw and screw it in normally.

Not because magnetic ones are bad, just because im too lazy/forgetful to buy one.

pastymuncher · 15 Mar 2013 at 16:54

I have always used one and have had no problems.

Gav_881 · 15 Mar 2013 at 21:54

Its along the same lines as an earthing wrist strap, you should always use one but no one ever does outside of work and very few people ever suffer as a result.

RJC · 15 Mar 2013 at 21:57

You be fine using a magnetic screw driver, comes in quite handy on the odd occasion.

Aston998 · 15 Mar 2013 at 22:55

Its fine to use, Wear a earthing wrist stap.

Admetos · 16 Mar 2013 at 03:06

Gav_881 said:
Its along the same lines as an earthing wrist strap, you should always use one but no one ever does outside of work and very few people ever suffer as a result.

Static damage is a real risk to components, magnetic screw driver is not.

Minstadave · 16 Mar 2013 at 03:12

Is static damage real? I've never bothered and not had a problem.

Admetos · 16 Mar 2013 at 03:37

Minstadave said:
Is static damage real? I've never bothered and not had a problem.

Ever had a computer component fail? If so how do you know it was not due to static damage.

http://www.youtube.com/watch?v=4WHbcd4NGJQ

Philtor · 16 Mar 2013 at 08:04

http://forums.overclockers.co.uk/showthread.php?t=18496139

Subliminal Aura · 16 Mar 2013 at 10:52

Philtor said:
http://forums.overclockers.co.uk/showthread.php?t=18496139

LOL .... I bet he doesn't go out in fear of being struck by lightning

Yeah OP - Magnetic screw driver is almost a must - I hate dropping screws behind the mobo or the ones that get lodged in somewhere and you forget about it - only to strike back and short your build when you power on :mad:

PhysicsMan94 · 16 Mar 2013 at 13:15

Subliminal Aura said:
LOL .... I bet he doesn't go out in fear of being struck by lightning...

Oi! I'm still on the forums you know... :eek:

Subliminal Aura · 16 Mar 2013 at 13:34

PhysicsMan94 said:
Oi! I'm still on the forums you know...

and my finest regards to you

3t3P · 16 Mar 2013 at 15:38

Its fine unless its a one tesla strength screwdriver