• Notice regarding image hosts and attachments. See here.

Is my bios dead?

Soldato
Joined
5 Mar 2006
Posts
3,975
Location
Nottingham
Bit peeved at the moment 'cuz I'm stuck on the ancient laptop :(

I've got a Gigabyte 990FXA-UD3 AMD 990X board running an FX6100. It's been absolutely fine for the last week. I've had it overclocked but never gone over 60c under load and usually kept the clock down to sensible levels.

I reverted everything back to stock today so that I could run some benchmarks and do a review of the CPU and decided I should update my bios to the latest one to see if it fixed a few issues with certain games.

I used Gigabyte's @BIOS program to flash the bios to the latest version. It all went fine and everything was running great for about an hour. I've just reset the system and now, after the post screen, it's stuck in an endless loop of "being to update backup bios to latest version". Once it's done updating it resets and starts it all over again...

I've tried downloading a copy of the bios on to a spare usb hdd from the laptop to see if I can re-flash it using Q-Flash but it's not accepting that the drive's there (even though it shows in the bios). Do I need an actual USB flash drive to do it?

Hope you guys can help me out, I've got a no-BS review of a FX6100 all typed up and ready to go and the results might interest some of you :p
 
Don't knock the ancient laptop, at least it's working ;)

Anyway, I'm not familiar with Gigabytes @BIOS Program you speak of, if it is some kind of in Windows BIOS updater then that's never a good thing.

Trying to re-flash seems the best bet, make sure that everything is partitioned to the correct file system too, else you could have some issues.

Edit: Didn't notice you'd fixed - Nice to know the old swearing at it trick worked
 
I've managed to dig out an old flash drive and flash the bios the proper way, god only knows what went wrong with it the first time but I certainly won't be flashing in windows again :mad:

And the write up's in the cpu section ;)
 
I have bricked a board before from Windows.

Windows decided that it was a good time to restart for updates, in the middle of a flash. I had it set to terminate all programs immediately for a restart/shut down rather than having a timeout set for that "waiting for programs to close" thing to pop up.

£200 board gone, I certainly learnt my lesson that time!
 
Lucky git. I've been swearing at a board for 2 days solid now and still no luck.

Any tips or good curses that you could pass on ? ;)

Have you tried getting your feet involved along with the swearing?

I've found that a few boots and swear words simultaneously can do the trick. :p
 
Back
Top Bottom