It looks like it's working...but it's not :(

Associate
Joined
4 Jun 2010
Posts
1,279
Here's the situation I'm in atm:
I have an old M848a rev 2.1 and some agp card that I have tested and works, I linked the board up to a psu put the gpu in and pressed power(well shorted the pins actually ;p) gpu fan spins green LED Chav fan spinz but no display, tried with 2 Diffrent gpus same thing the only things connected are 20pin and CPU fan so it must at least post and let me into the bios right? I can also confirm that this board was working fine yesterday :(

Thanks all
Fredie589 :)
 
PSU? What are the connections you have for the PSU?

Oh sounds bad mobo issue maybe are they colour coded as in ram slots?

If so try the other with one in A and one in B

But again a full spec will do you favours.
 
Last edited:
Nice but im sure you can find more detailed info on the hardware for a 300W psu? Please?

The nicer its defined the quicker and fluid the answer.
 
Last edited:
Open it and take down the numbers? Please?

Have you tried linux to test boot issues as i seem thats your one point for now?

Backup your hard drive!
 
Last edited:
Back
Top Bottom