Just de lidded my 3770k
- Thread starter buzzlightweight
- Start date
CPU Cooler H100, 10 mins of prime @ 4.8GHz, Liquid pro on CPU and IHS (UNCURED!)
1.41v
CPU Cooler H100, 10 mins of prime @ 4.7GHz, Liquid pro on CPU and IHS (UNCURED!)
1.34v
AMAZING
gonna keep going till i hit 1.45v or 85c
1.41v
CPU Cooler H100, 10 mins of prime @ 4.7GHz, Liquid pro on CPU and IHS (UNCURED!)
1.34v
AMAZING
gonna keep going till i hit 1.45v or 85c
tyvm
thats all iv done but i really cleaned up my cpu as much as poss
im just sorting out my images
Soldato
CPU Cooler H100, 10 mins of prime @ 4.8GHz, Liquid pro on CPU and IHS (UNCURED!)
1.41v
CPU Cooler H100, 10 mins of prime @ 4.7GHz, Liquid pro on CPU and IHS (UNCURED!)
1.34v
AMAZING
gonna keep going till i hit 1.45v or 85c
Very good results!!
Well done!I agree, keep going until 1.45v or 85c
Associate
- Joined
- 10 Jan 2012
- Posts
- 2,375
Give intel burn test (standard) a go. I'd be very impressed if it managed to stay below 75 @ 1.41v 4.8ghz.
You could probably sell that cpu for a nice profit
You could probably sell that cpu for a nice profit
Caporegime
i take my lid....er hat off to you but it could have easily ended in tears
but it could have easily ended in tears
Very good results!!
I agree, keep going until 1.45v or 85c
hay rossi, cheers mate
Give intel burn test (standard) a go. I'd be very impressed if it managed to stay below 75 @ 1.41v 4.8ghz.
You could probably sell that cpu for a nice profit
i will do a burn in a mo
thats all iv done but i really cleaned up my cpu as much as poss
im just sorting out my images
Would be good to see some pics of the procedure. Great temps btw, nicely done.
IBT done and under 75c
Associate
- Joined
- 10 Jan 2012
- Posts
- 2,375
So this is the knife i bought -
it has a very thin blade but still there was only one corner i could get it under to begin with, once it was under i down to the next corner, to the next, to the next.
This were my tools of mass destruction! lol
This is what it looked like once i got the lid off but thats not the end of it
This is what it looked like after a long time spent cleaning it, the silicon is a biznitch to get off the IHS
I used my finger nails to clean off the silicon, it was too dodgy with the knife, it just took a while
If you take a look at where the notch is for the socket locator, notice i did nip the pcb
luckily it was the very edge!
it has a very thin blade but still there was only one corner i could get it under to begin with, once it was under i down to the next corner, to the next, to the next.
This were my tools of mass destruction! lol
This is what it looked like once i got the lid off but thats not the end of it
This is what it looked like after a long time spent cleaning it, the silicon is a biznitch to get off the IHS
I used my finger nails to clean off the silicon, it was too dodgy with the knife, it just took a while
If you take a look at where the notch is for the socket locator, notice i did nip the pcb
luckily it was the very edge!
Last edited:
Associate
- Joined
- 10 Jan 2012
- Posts
- 2,375
it was after the IBT finished, want me to do it again?
na its grand, but if you want to go for it
take the pic like the the ones posted before without speedstep! sorry for being a skeptical hippo
Soldato
Damn, that's brave. Or crazy.
How did you reattach the top?
How did you reattach the top?
Damn, that's brave. Or crazy.
How did you reattach the top?
just clamped it back with the socket!
na its grand, but if you want to go for it
take the pic like the the ones posted before without speedstep! sorry for being a skeptical hippo
Look at the time stamps, AFTER is only a few moment after IBT completed
Just before IBT finished
After
going to try 4.9 now brb
Soldato
Definitely crazy!
The temperatures are ace, I just don't think I could do this to a brand new chip.
4.9GHz and 5GHz is out of my reach, not the temps thou, its the volts, 4.9GHz @ 1.48v crashed prime after 5 mins, temps were 71c!!!!
I cannot get over how good the liquid pro is and the de lidding!!
I cannot get over how good the liquid pro is and the de lidding!!
OMG if only you could use 1.5v 24/7, my temps still in the 70s 82c top!!
just proves how much of a fail intel did with its tim, if they soldered i bet everyone would be running 5GHz ish
eyetrip had 4.9GHz @ 1.288v imagine if he had not killed it!! 5.3GHz easy
just proves how much of a fail intel did with its tim, if they soldered i bet everyone would be running 5GHz ish
eyetrip had 4.9GHz @ 1.288v imagine if he had not killed it!! 5.3GHz easy